Qingyuan Mobile Toilet Specifications

There is currently no detailed regional specification information for mobile toilets in Qingyuan, but common specifications for mobile toilets can be categorized based on type, function, and usage scenarios as follows. The actual selection should be adjusted according to local needs:

1. Basic Mobile Public Toilets

• Single-Occupancy (Standalone): Minimum dimensions approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height; standard dimensions are 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height. These toilets are suitable for temporary venues with low foot traffic, such as small events or construction sites, and are typically equipped with basic sanitation facilities.
• Double-Occupancy (Two Stalls): Standard dimensions are 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height, including two stalls and a shared sink. Suitable for medium-traffic scenarios, such as community events or temporary markets, to enhance usage efficiency.

2. Functional Mobile Public Toilets

• Accessible Toilets: At least 2 meters in length, 1.5 meters in width, and 2.4 meters in height, requiring a 1.5-meter by 1.5-meter turning space for wheelchairs, with handrails at a height of 0.85-0.9 meters. These toilets must comply with accessible design standards and are suitable for public venues or service scenarios for special populations.
• Baby/Family Toilets: Approximately 2.2 meters in length, 1.8 meters in width, and 2.4 meters in height, equipped with baby changing stations and child-sized toilets. Primarily serve family users and are commonly found in tourist attractions or large shopping malls.

3. Mobile Public Toilets for Special Scenarios

• Temporary Toilets for Tourist Attractions/Large Events: Multi-unit (4-6 stalls) approximately 5-8 meters in length, 2 meters in width, and 2.2 meters in height, allowing for rapid deployment in high-traffic areas to meet peak demand.
• Compact Models: Utilizing lightweight steel frames or fiberglass materials, dimensions can be reduced to 6 meters (length) × 2 meters (width), suitable for temporary or mobile scenarios, such as emergency rescue or field operations.

4. General Specification References

• Single-Stall Mobile Restrooms: Length 1.2-1.5 meters, width 1.0-1.2 meters, height 2.2-2.5 meters, suitable for basic sanitation needs.
• Double-Stall Mobile Restrooms: Length 2.4-3.0 meters, width 1.2-1.5 meters, height 2.2-2.5 meters, accommodating two users simultaneously.
• Multi-Occupancy Mobile Public Toilets: Common dimensions are 3.6 meters (width) × 1.2 meters (length) × 2.2 meters or larger, with some supporting customization, suitable for high-traffic scenarios.

Design Considerations: Must comply with ergonomics (e.g., stall width ≥ 0.9 meters), materials should be lightweight yet strong, waterproof, and moisture-resistant, and adhere to the relevant provisions of the "Urban Public Toilet Design Standard" (CJJ 14-2016). The actual selection should be adjusted based on the usage scenarios, foot traffic, and transportation conditions in Qingyuan.