Pu'er Mobile Public Toilet Dimensions

No specific information on the dimensions of mobile public toilets in the Pu'er area has been found at present, but the common dimensions of mobile public toilets are as follows:

Basic Mobile Public Toilets

• Single-occupancy (Standalone): The minimum dimensions are approximately 1.2m in length × 1.0m in width × 2.2m in height, and the regular dimensions are about 1.5m in length × 1.2m in width × 2.3m in height. There are also regular models with dimensions of 110cm in length, 110cm in width, and 230cm in height, and mini single-occupancy models with dimensions of 100cm in length, 100cm in width, and 220cm in height. Most adopt standard dimensions of 1.1m in length, 1.1m in width, and 2.3m in height. These single-occupancy mobile public toilets are suitable for places with relatively low foot traffic and limited space, such as small parks and temporary event venues.
• Double-occupancy (Two Toilet Stalls): The regular dimensions are approximately 2.5m in length × 1.5m in width × 2.3m in height. Double-occupancy mobile toilets usually have dimensions of 180cm in length, 110cm in width, and 230cm in height. Double-occupancy mobile public toilets can meet the usage needs under a certain amount of foot traffic and are commonly found in areas with slightly higher foot traffic, such as streets and scenic spot entrances.

Functional Mobile Public Toilets

• Barrier-free Toilets: The dimensions should be at least 2.0m in length × 1.5m in width × 2.4m in height, with a reserved wheelchair turning space of at least 1.5m × 1.5m. The handrail height should be between 0.85 - 0.9m, the floor should be non-slip, and the slope of the entrance ramp should be ≤ 1:12. There are also models with dimensions of 180cm in length, 150cm in width, and 240cm in height. Barrier-free toilets mainly provide convenience for special groups such as the disabled and the elderly and are more suitable for installation in public places such as large shopping malls and around hospitals.
• Baby/Family Toilets: The dimensions are approximately 2.2m in length × 1. (Incomplete information). Baby/family toilets take into account the special needs of mothers and babies and are equipped with facilities such as baby changing tables inside to provide convenience for families traveling with babies.

Dimensions of Other Structural Components

• Toilet Stall Part: 645 millimeters (0.645 meters) in length, 545 millimeters (0.545 meters) in width, and 200 millimeters in height.
• Management Room: 2.46 meters in depth, 1.4 meters in width, and 2.1 meters in height.
• Disabled Stall: The dimensions are similar to those of regular toilet stalls, but additional barrier-free facilities are required.

In addition, the width of the aisle for opening doors inside and outside mobile public toilets is generally 1.5 meters and should not be less than 1.3 meters. The width of the aisle for the outer doors of double-row toilet stalls should preferably be between 1.50 - 2.10m. When making a specific choice, appropriate specifications can be selected according to the actual usage scenario (such as foot traffic and ground bearing capacity), and professional advice can be sought to obtain a plan.