How to Flush in Public Mobile Toilets

There are various flushing methods in public mobile toilets, and the specific operation depends on the type of flushing device. Here are the common types and their operation methods:

Manual push-button flushers are the most common type in public mobile toilets, divided into two types: purely manual push-button and delayed self-closing flush valves. The purely manual push-button requires continuous finger pressure on the button, with the flush duration determined by how long the button is pressed, suitable for scenarios requiring flexible control of flushing time. The delayed self-closing flush valve only needs to be pressed once, and the flushing device will automatically run for 6-10 seconds before closing, making operation more convenient. When operating, note the following: After using the toilet, step back away from the toilet bowl opening, wrap your finger with tissue or press the button with your elbow joint to avoid direct contact with possible stains; press with moderate force and press all the way down in one go to ensure the flushing device is fully triggered.

Manual lever flushing is more commonly seen in low-end old-style public toilets, where water is introduced into the toilet bowl to complete flushing by pulling the flushing device on the lever. When operating, find the position of the lever, usually located on the side or back of the toilet bowl, hold the lever with your hand and pull it down to trigger flushing. Since this method requires direct hand contact with the lever, it is recommended to wipe your hands with tissue after using the toilet to maintain hygiene.

Sensor-based flushing is divided into two types: automatic sensing and light-touch sensing. The automatic sensing type will automatically trigger flushing after detecting that a person has left the toilet through the sensor; the light-touch sensing type requires light-touching the sensing area with a small indicator light (such as on the wall or side of the toilet bowl) after using the toilet to trigger flushing. When operating, there is no need to manually press or pull, but be careful to avoid blocking the sensor to ensure its normal operation.

Foot-pedal flushing triggers flushing by stepping on the foot pedal, commonly seen in scenarios where hand contact needs to be avoided. When operating, find the position of the foot pedal, usually located on the ground in front of the toilet bowl, step on the pedal with your foot to trigger flushing. This method can reduce hand contact with the flushing device and lower the risk of cross-infection.

Tank-type devices are more commonly seen in traditional public toilets, where flushing is triggered by pressing the red button or pulling the rope on the tank. When operating, find the button or rope on the tank, press or pull to complete flushing. Some tank-type devices may be equipped with a dual-button design, with the large button (full flush) having a larger water volume and the small button (half flush) having a smaller water volume, allowing you to choose which button to press according to actual needs.