Specification Requirements for the Thickness of Prefabricated Houses
The specification requirements for the thickness of prefabricated houses vary depending on the component type and usage scenario, as detailed below:

I. Thickness Specifications for Prefabricated Panels There is no unified standard for the thickness of prefabricated panels, but common specifications exist. 120mm-thick prefabricated panels are mostly used in light-load scenarios, such as internal partition walls, due to their relatively light weight and ability to meet basic separation needs. 150mm-thick prefabricated panels are commonly used for floor slabs or exterior walls, which need to withstand significant loads, such as human activity, furniture placement, or external wind pressure. In special scenarios, high-rise residential floor slabs may adopt 180-240mm-thick prefabricated panels to enhance structural rigidity; super high-rise buildings may even require 300mm-thick prefabricated panels to cope with extreme loads and wind-induced vibrations.
Furthermore, the thickness range varies among different types of prefabricated panels. Ordinary cement prefabricated floor slabs typically have a thickness of 60-120mm, depending on the span (the larger the span, the greater the required thickness). Steel-framed lightweight prefabricated panels have a thickness range of 80-150mm, improving load-bearing capacity and reducing self-weight through the steel frame. Reinforced truss prefabricated floor slabs have the widest thickness range, from 100-300mm, suitable for large-span or heavy-load scenarios, such as commercial building floors or industrial plant platforms.
II. Thickness Specifications for Prefabricated Walls Common thickness specifications for prefabricated walls include 75mm, 90mm, 100mm, and 120mm, with specific choices depending on the usage function. 75mm walls are mainly used for interior partitions, reducing floor space while separating spaces. 90mm walls are often used for exterior wall insulation layers, improving thermal performance by increasing thickness. 100mm walls combine insulation and structural functions, suitable for lightweight house construction. 120mm walls are used in heavy industrial buildings, which need to withstand equipment vibrations or lateral wind pressure.
In practical applications, wall thickness may be adjusted based on regional habits or design requirements. For example, in prefabricated houses popular in rural areas of Henan, the thickness of prefabricated wall panels is often 120mm (i.e., 12 centimeters), meeting both structural safety requirements and local construction practices.
III. Core Principles for Thickness Selection The determination of the thickness of prefabricated house components requires comprehensive consideration of usage scenarios, design loads, material properties, and production conditions. For example, floor slab thickness must meet span and load requirements, while wall thickness must balance insulation and structural needs. Design calculations should be based on specifications (such as the Technical Standard for Prefabricated Concrete Buildings) and consider the production capacity of the prefabrication plant to ensure that component thickness is both safe and economical.




