Prefabricated House Component Price

The prices of prefabricated house components vary significantly depending on their type, material, and specifications. Specific choices should be made based on needs, and suppliers should be contacted for price comparisons.

I. Classification by House Type

1. Prefabricated Panel Houses: The cost per square meter ranges from 300 to 600 yuan. Simple panel houses start at a minimum of 300 yuan/㎡, while well-decorated panel houses can reach up to 600 yuan/㎡. Taking a 100㎡ house as an example, the total budget is approximately 30,000 to 60,000 yuan, with low-end configurations for office use costing around 30,000 yuan and high-end commercial decorations requiring 60,000 yuan.
2. Prefabricated Houses:
   • Light Steel Structures: 1,500 to 2,500 yuan/㎡, suitable for rapid construction of temporary or permanent buildings.
   • Wooden Structures: 2,000 to 3,500 yuan/㎡, often used for villas or landscape buildings, emphasizing environmental protection and aesthetics.
   • Concrete Structures: 3,000 to 4,000 yuan/㎡, suitable for high-rise buildings or scenarios requiring high structural strength.

II. Classification by Component Type

1. Prefabricated Panels:
   • Standard Thickness (80mm): 200 to 400 yuan/㎡.
   • Material Differences: Ordinary cement panels start at 83 yuan, mid-range quality costs around 120 yuan, and high-end solid panels cost over 150 yuan; hollow panels are approximately 30% cheaper than solid panels.
2. Commonly Used Rural Prefabricated Components:
   • Five-Hole Floor Panels: 18 to 28 yuan per meter, suitable for low-rise building floors.
   • Cast-in-Place Floor Panels: 225 yuan/㎡, requiring on-site pouring with high flexibility.
   • 100mm Civil Floor Panels: Approximately 100 yuan/㎡, commonly used in rural self-built houses.
3. Other Prefabricated Components:
   • Concrete Prefabricated House Components: Such as steel-framed concrete lightweight floor panels at 480 yuan per piece, reinforced concrete prefabricated houses at 450 yuan per set, and foundation prefabricated templates at 150 yuan per piece.
   • Construction Equipment and Materials: Such as EPS cement foam machines at 168,000 yuan per unit, steel fibers at 3.9 yuan per kilogram, and hollow floor panel machines at 14,000 yuan per unit.

III. Price Influencing Factors and Recommendations
Actual prices are significantly influenced by regional freight costs, construction difficulty, and material market fluctuations. For example, freight costs in remote areas may account for more than 20% of the total cost; complex terrains require additional construction fees. It is recommended to contact at least three local suppliers, provide specific needs (such as area, structural type, decoration standards), obtain accurate quotes, and compare service terms.