Back to blog
Article

CE Certification Process for Prefabricated Houses

Admin September 18, 2026

The CE certification process for prefabricated houses needs to be determined based on the specific type. Common types include the certification processes for modified container houses and prefabricated concrete hollow floor houses as follows:

For modified container houses, the CE certification process is as follows:

  1. Directive and Standard Confirmation: Determine the applicable directives based on the intended use of the house. For example, the Construction Products Regulation (CPR) corresponds to EN 1090 (steel structures) and EN 1993 (steel structure design specifications); if mechanical or electrical equipment is included, follow EN 12100 and EN 62368-1 under the Machinery Directive (MD); electrical equipment must comply with the EN 60335 series standards under the Low Voltage Directive (LVD).
  2. Technical Documentation Preparation: Submit structural drawings, modification design plans, material descriptions (such as steel grades and corrosion protection treatments), welding or fastening parameters, electrical wiring diagrams, fire protection system details (such as smoke detectors and fire extinguisher configurations), ventilation system descriptions, and design calculation documents for wind loads, snow loads, and earthquake resistance (for building modules).
  3. Third-Party Testing (if necessary): Conduct mechanical strength tests (such as load-bearing and deformation resistance), durability tests (such as material fatigue life), fire resistance tests (such as combustion performance ratings), and airtightness and watertightness tests (such as door and window sealing) to ensure compliance with relevant standards.
  4. Declaration of Conformity (DoC) Preparation: The manufacturer signs the EU Declaration of Conformity, declaring that the product meets all applicable directives and standard requirements and assumes legal responsibility.
  5. CE Marking: After completing the above steps, affix the CE mark in a prominent location on the product or container to indicate that the product meets EU market access requirements and can be legally sold.

For prefabricated concrete hollow floor houses, the CE certification process is as follows:

  1. Standard Confirmation: Testing must be conducted in accordance with the EN 1168:2005+A3:2011 standard, covering indicators such as dimensional deviations, load-bearing capacity, durability (such as frost resistance and carbonation resistance), and fire resistance of the floor slabs.
  2. Certification System Selection: Adopt System 2+, which requires continuous supervision of the production factory by a Notified Body (NB) in the EU, including regular factory inspections and product sampling inspections to ensure ongoing compliance with standard requirements during the production process.

Key Considerations:

  • CE certification is a mandatory requirement for products entering the EU market. Products without the CE mark may face the risk of return or fines.
  • The certification processes for different types of prefabricated houses vary significantly. Applicable directives and standards must be selected based on the specific structure, intended use, and materials.
  • Third-party testing and NB supervision are crucial for ensuring product compliance and cannot be omitted or simplified.