Back to blog
Article

Prefabricated Concrete Beams for Houses

Admin September 17, 2026

Prefabricated concrete beams for houses are the main prefabricated components of prefabricated concrete frame structures, including prefabricated solid beams and prefabricated composite beams. They refer to concrete beam components that are prefabricated in factories and then transported to construction sites for installation and fixation.

Production Process and Technical Characteristics

The production of prefabricated beams follows a standardized process, covering template assembly, steel bar binding, concrete pouring and curing, and other steps. Throughout the process, industry standards such as the "Construction Engineering Construction Process Regulations" must be followed. Modern production incorporates intelligent circular production lines and digital twin technology, achieving full automation of steel bar processing, pouring, curing, tensioning, and grouting through mobile pedestals, hydraulic templates, intelligent vibration systems, and steam curing processes. For example, steam curing can precisely control temperature and humidity, shortening the curing cycle and enhancing concrete strength; the intelligent vibration system monitors vibration compactness through sensors, avoiding the unevenness of manual operations.

Application Advantages

  1. High Efficiency: Mass production on factory assembly lines ensures consistent cement-sand ratios and curing conditions, resulting in reliable component strength. After being transported to the construction site, they can be directly installed, eliminating the need for on-site formwork erection, steel bar binding, pouring, and waiting for drying, shortening the construction period by more than 30%. This is particularly suitable for projects with tight schedules or varying levels of construction team expertise.
  2. Lower Cost: Mass production dilutes mold costs and labor expenses. For structures with spans of less than 1.5 meters, such as small window openings, they offer significantly better cost-effectiveness compared to cast-in-place beams.

Application Limitations

  1. Poor Size Adaptability: Prefabricated beams are produced in standardized sizes, making it difficult to meet the needs of irregularly shaped openings or large door openings and floor-to-ceiling windows with spans exceeding 1.5 meters. Customized designs are required, increasing costs.
  2. Insufficient Connection Integrity: After installation, their connection to walls relies on post-grouting, resulting in weaker integrity compared to cast-in-place beams. In earthquake-prone areas, measures such as strengthening node construction and using high-strength grouting materials are necessary to enhance seismic performance.

Technical Standards and Sustainable Development

Industry technical standards continue to improve. For example, the "Technical Standard for Prestressed Prefabricated Concrete Frame Structures" (JGJ/T502-2024) will be implemented in 2025, regulating the design, production, and construction requirements of prefabricated beams. In terms of green development, the recycling of prefabricated beams is technically and economically feasible. Some projects convert exhaust gases into biofuels through microalgae carbon fixation technology, achieving resource utilization. Additionally, the development of new materials such as lightweight ultra-high-performance concrete (LUHPC) and ultra-high-performance concrete (UHPC) has improved the mechanical properties and durability of prefabricated beams while reducing structural self-weight, promoting the development of lightweight and low-carbon buildings.