Portable Toilet Bucket

The installation steps for different models of portable toilet buckets are as follows:

Common models of portable toilet buckets include the H76 Basic Model and the H80 Basic Model, with some differences in the installation steps for each model.

Installation Steps for the H76 Basic Model:

• Install Silicone Anti-Slip Pads: First, insert the silicone anti-slip pads into the four corners at the bottom. The function of the silicone anti-slip pads is to increase the friction between the portable toilet bucket and the ground, preventing sliding or displacement during use and ensuring the safety of users. During installation, make sure the anti-slip pads are accurately embedded in the four corners at the bottom and firmly installed to avoid detachment during use.
• Connect the Upper and Lower Buckets with Buckles: Align the upper and lower buckets, and then press down on the buckles. A certain amount of force is required when pressing the buckles to ensure they tightly connect the upper and lower buckets. After pressing, firmly pat the bucket and carefully check if the buckles are securely fastened. This step is crucial; if the buckles are not tightly fastened, the upper and lower buckets may separate during use, posing a safety hazard.
• Install Other Components: Align the holes to install the backrest, armrests, seat ring, lid, inner bucket, and tissue box. When installing these components, follow the holes precisely to ensure each component is accurately installed in place. After installation, check if all components are firmly installed and if movable components (such as the seat ring and lid) can open and close normally.

Installation Steps for the H80 Basic Model:

• Connect the Upper and Lower Buckets with Buckles: Similarly, first align the upper and lower buckets, and then press down on the buckles. After fastening, firmly pat the bucket and check if the buckles are securely fastened. This step is similar to that of the H76 Basic Model, aiming to ensure a stable connection between the upper and lower buckets.
• Install the Tissue Box and Close the Lid: Align the holes to install the tissue box, and then close the lid after installation. The installation of the tissue box should ensure its position is appropriate for easy access by users. Closing the lid can prevent dust and other impurities from entering the tissue box, keeping the tissues clean.