Simple Portable Toilet and Bathroom Construction

There are mainly three ways to construct a simple portable toilet and bathroom:

1. Using a water storage barrel First, split a household water storage barrel in half with an angle grinder and fix universal wheels at the four corners of a wooden board for mobility. Secure wooden strips and self-tapping screws to the upper side of the barrel to increase height and form a frame structure. Cut an opening on the side of the barrel, install sponge strips to form a door frame, embed plastic soft boards to create walls, and use the upper half of the barrel as the roof. For aesthetics, apply white waterproof paint. The door is made by joining honeycomb wooden boards with foam strips. Drill a hole at the bottom of the barrel to install a drain pipe as a floor drain. Connect direct fittings to the side and bottom holes and insert a small water storage device (such as a plastic bucket) for water supply. Create a simple bathroom heater with water pipes, install a three-way fitting below the inlet pipe to connect a showerhead, place a toilet and secure the water tank with glass glue. Connect the drain pipe to a sewage bucket, extend the outlet pipe three-way horizontally to the doorway as the inlet pipe for the sink, and drill a hole in the door to install a fitting and connect a hose.

2. Using a water storage tank and a pallet Fix universal wheels at the four corners of a pallet and place a water storage tank recovered from a garbage station. Use an angle grinder to cut along the top marking line to remove the tank top, forming an open tank. Invert and stack another open tank, secure the outer frame with self-tapping screws, and cut a rectangular opening as the doorway. Drill a hole in the interior floor, insert an elbow, and connect a water pipe (sealed with glue). Cut off the excess part, place the toilet, align it with the drain, and secure it with glue. Use wall clips to secure the water pipe and install a faucet. Fix a pipe cap with screws below, connect the water pipe, and drill a hole as the drain outlet. Drill a hole in the pipe cap, apply glass glue, and secure a stainless steel basin as the sink. Connect the toilet tank inlet pipe and the shower hose, install a bracket and a toilet seat, and equip it with a spray showerhead. Fix hinges on the tank frame, connect it with a wooden board to form a door, and install a handle.

3. Economical and practical model (designed by Taihe manufacturer) This design is industrialized, featuring a gray and white metal carved panel exterior with separate entrance doors for men's and women's toilets. The front wall is equipped with sliding windows and stone wall lights. Each toilet compartment has an independent squatting position and is equipped with a complete set of water and electricity sanitary ware (such as water tanks, flush valves, lighting, etc.). This type is suitable for public places, with a sturdy structure and complete functions. However, it requires professional manufacturing and installation by a factory, making it difficult for individuals to construct.