Portable Simple Sanitary Toilet

There are multiple ways to make portable simple sanitary toilets. Here are several common methods for you in detail:

Making with a water storage barrel

First, prepare a water storage barrel and use an angle grinder to split it in half lengthwise. Fix universal wheels at the four corners of a wooden board to facilitate the movement of the toilet. Then, use wooden strips and self-tapping screws to increase the height on the upper side of the barrel. Next, use the angle grinder to cut an opening on the side of the water storage barrel and install a sea cotton strip to form a door frame. Embed plastic soft boards between the wooden strips to create an elevated wall. Place the upper half of the water storage barrel on top of the wooden strips as a roof. To enhance aesthetics, paint the wooden strips with white waterproof paint. Use foam strips to拼接 (assemble) discarded honeycomb wooden boards to make a simple door. Cut an opening at the bottom of the barrel and install a drain pipe to form a floor drain. Cut holes on the side and bottom of a plastic bucket and connect them with direct fittings. Place the plastic bucket on the roof as a small water storage device. Connect the bath heater made of water pipes. Install a three-way fitting below the water inlet pipe and connect a showerhead. Place the toilet on the opening of the drain pipe, install the water tank properly, and fix it with glass glue. Connect the drain pipe to the sewage bucket. Horizontally connect a water pipe from the three-way fitting of the outlet pipe to the door as the water inlet pipe for the sink. Cut an opening on the door, install a fitting, and connect a hose.

Making with a water storage tank and a pallet

First, fix universal wheels at the four corners of the bottom of a pallet. Place a water storage tank recovered from a garbage station on the pallet. Use an angle grinder to cut along the marked line on the top of the water storage tank to remove the top and form an open tank. Invert another open-top water storage tank and stack it on the first tank, and fix the outer frame with self-tapping screws. Cut out rectangular openings and a door opening. Cut an opening on the internal floor of the water storage tank, insert a elbow from the bottom upwards, connect it to a water pipe, and seal it with glue. Cut off the excess water pipe. Place the toilet in alignment with the drain opening and fix it with glue. Fix the water pipe on the wall buckles and install a faucet. Fix a pipe cap with screws below the faucet. Connect the water pipe and cut an opening at the bottom as the outlet for the drain pipe. Cut an opening on the pipe cap, apply glass glue, and fix a sink made of a stainless steel basin. Connect the water inlet pipe to the toilet water tank, connect the shower hose, and install the shower bracket. Install the toilet seat and a showerhead made of a water pipe. Finally, bring wooden boards, fix hinges on the frame of the water storage tank, and fix the other side of the hinges to a wooden box to form the door of the toilet. Install a door handle on the door.

Assembly with building blocks

There are portable public toilets assembled with building blocks. These public toilets continue the cyberpunk style and are full of a sense of technology. However, the specific assembly method needs to be carried out according to the type of building blocks and design requirements.