Dimensions of Mobile Toilets in Parks
The dimensions of mobile toilets in parks vary depending on the type and usage scenario, with common specifications as follows:
1. Single-Person Standard Type
This type is suitable for regular park settings and meets the needs of a single user. Its length ranges from 1.2 to 1.5 meters, width from 0.8 to 1.0 meters, and height from 2.2 to 2.4 meters. Among mainstream models on the market, the standard size is 110 cm in length, 110 cm in width, and 230 cm in height. This design balances space utilization and user comfort, making it suitable for most park pathways or small event areas. For space-constrained scenarios, the mini single-person model further reduces dimensions to 100 cm in length, 100 cm in width, and 220 cm in height. By reducing the floor area (by 10%-20%) and lowering the height (by 5 cm), it adapts to narrow passageways or temporary setups.
2. Double-Person Standard Type
The double-person mobile toilet enhances usage efficiency by increasing width, suitable for areas with high foot traffic. Its length ranges from 1.8 to 2.2 meters, width from 1.0 to 1.2 meters, and height from 2.2 to 2.4 meters. A typical size is 180 cm in length, 110 cm in width, and 230 cm in height. By expanding horizontally (increasing width by 10 cm), it allows for simultaneous use by two people while maintaining the same height as the single-person model to ensure structural stability. This design is commonly found at park entrances or large event venues, effectively alleviating queueing pressure.
3. Barrier-Free Type
To meet the needs of special groups such as the disabled and elderly, barrier-free mobile toilets have significantly larger dimensions. Their length ranges from 2.0 to 2.4 meters, width from 1.2 to 1.5 meters, and height from 2.2 to 2.4 meters. The standard size is 180 cm in length, 150 cm in width, and 240 cm in height. By widening the doorway (increasing width by 40 cm), lowering the threshold height (usually ≤2 cm), and reserving wheelchair turning space (diameter ≥150 cm), it enables barrier-free access. This design must comply with the requirements of the "Barrier-Free Design Code" and is commonly found on park barrier-free pathways or comprehensive service areas.
4. Scenic Area Custom Type
In response to the characteristics of high tourist flow and concentrated usage times in scenic areas, custom mobile restrooms adopt a modular design. The overall dimensions are 3 meters by 5 meters, with a height of 3 meters. Internally, they are divided into men's restrooms (2 squat toilets) and women's restrooms (3 squat toilets), improving usage efficiency through optimized space layout (such as using suspended water tanks and folding doors). This design is commonly found in mountainous or remote scenic areas, allowing for rapid deployment to meet peak demand.
5. Prefabricated Mobile Restroom
The prefabricated type is manufactured in a factory and assembled on-site, with dimensions of 2.5 meters by 6.5 meters. It can be configured with independent squat toilets, sinks, management rooms, and other functional areas. Its advantages lie in scalability (expandable by adding modules) and rapid installation (usually completed within 1-2 days), making it suitable for large parks or temporary event venues.
