Back to blog
Article

Prefabricated Panels for Houses in Ningxia

Admin September 18, 2026

Information about prefabricated panels for houses in Ningxia is as follows:

I. Typical Application Cases Some buildings in the Xiangmin A area of Xixia District, Yinchuan City, use prefabricated panel structures. Among them, Building 19, built in 1992, is a five-story brick-concrete structure involving 60 households and has not been identified as a dilapidated building. This case shows that some multi-story residential buildings constructed in Ningxia from the 1980s and 1990s to the early 21st century still use prefabricated panels and can maintain a safe usage state through professional identification.

II. Key Technical Points for Purchase

  1. Thickness and Load-Bearing Matching: In Ningxia, multi-story buildings commonly use 120-150mm thick prefabricated panels (such as residential floor slabs). For roofs or areas with higher load-bearing requirements, panels with a thickness of more than 180mm should be selected to ensure structural safety.
  2. Material and Process Standards: High-quality prefabricated panels should have a flat and smooth surface without cracks, honeycombs, or other defects. They should produce a clear sound when knocked on, and the steel bar spacing should be uniform (200-250mm) to avoid insufficient load-bearing capacity due to sparse steel bars.
  3. Climate Adaptability Optimization: In view of the large temperature difference between day and night and the dry climate in Ningxia, it is recommended to choose a concrete formula with anti-cracking fibers added and apply a waterproof coating on the surface to reduce the risk of cracking caused by temperature changes and dry shrinkage.
  4. Qualification and Testing Verification: Regular manufacturers need to have the Production License for Concrete Prefabricated Components and provide recent factory inspection reports (such as indicators like compressive strength ≥ C30 and impermeability ≥ P6) to ensure that the products meet national standards.

III. Local Supply and Policy Support PC component manufacturers in Xingqing District, Yinchuan can provide products such as prefabricated reinforced concrete partition walls, stairs, and composite slabs, with services covering areas such as Xixia District and Xingqing District. Choosing local suppliers can reduce transportation costs. According to the Interim Measures for the Administration of Urban Renewal in Yinchuan City, except for dilapidated buildings and illegal buildings, Ningxia advocates extending the service life of prefabricated panel houses through renovation (such as roof waterproofing and exterior wall insulation) rather than large-scale demolition, providing policy support for the maintenance of existing buildings.

IV. Cost and Construction Precautions Transportation costs account for about 10%-15% of the total price of prefabricated panels. It is recommended to give priority to suppliers within 30 kilometers. During installation, it is necessary to confirm that the construction team has the operation qualification for lifting equipment to avoid structural damage caused by improper lifting.