Nanyang Mobile Toilet Installation Method

The installation method for mobile toilets in Nanyang should be carried out according to the toilet type (such as integrated or split-type) and structural characteristics, with core steps including positioning, assembly, connection, and commissioning. The specific process is as follows:

I. Positioning and Foundation Treatment

1. Site Planning: Determine the installation location based on usage needs, avoiding low-lying areas prone to water accumulation to ensure proper ground drainage.
2. Foundation Treatment: If the ground is soil or uneven, it should be hardened (e.g., by pouring concrete) or covered with steel plates to ensure a solid foundation. For split-type toilets, reserve positions for sewage pipe connections; for integrated toilets, plan water and electricity access points in advance.

II. Chassis and Frame Installation

1. Chassis Positioning: Use a forklift or crane to place the prefabricated steel structure chassis steadily at the predetermined location, adjusting it to a level state with a spirit level to avoid structural instability or poor drainage due to tilting.
2. Frame Fixing: For split-type toilets, connect the independent frame to the chassis with bolts, ensuring good sealing at the connection points to prevent sewage leakage.

III. Wall and Roof Panel Assembly

1. Wall Installation: Insert the sandwich panel wallboards into the chassis slots one by one and fix them with bolts or clips. Apply sealant at the joints between wallboards to prevent rainwater infiltration.
2. Roof Installation: After installing the roof panels, perform waterproofing treatment (e.g., applying sealant or laying waterproof membranes) at the eaves and joints to ensure overall sealing.

IV. Internal Facility Connection

1. Equipment Installation: Fix internal partitions, toilets, flushing systems, sinks, and other facilities, ensuring they are securely installed.
2. Water and Electricity Connection:
   • Water and Electricity Pipes: Connect the water inlet pipes, sewage pipes, and electrical circuits. The modular quick-connect design simplifies operations but should be carried out by professionals to avoid water leakage or short circuits.
   • Ventilation System: Install exhaust fans or fresh air systems to ensure proper air circulation inside the toilet.

V. Functional Inspection and Commissioning

1. Flush Test: Check the flushing force and drainage speed to ensure there is no blockage.
2. Circuit Inspection: Test whether the lighting and ventilation equipment are working properly and check for electrical leakage hazards.
3. Sealing Inspection: Conduct a water spray test on the joints between wall panels, doors and windows, and sewage outlets to confirm there is no leakage.

Installation of integrated mobile toilets (such as container-type toilets) is simpler: The factory has completed the interior decoration and equipment integration, and only requires lifting into place, connecting water and electricity, and sewage pipes on-site, with the overall installation time shortened to 2-4 hours.

Installation Standards: Must comply with the "Hygiene Standards for Mobile Toilets" (GB/T 21239-2023) to ensure structural safety, hygiene standards, and regular maintenance.