How to Flush Mobile Toilets in Nanchang
There are various flushing methods for mobile toilets in Nanchang, and different types have different flushing methods, as detailed below:
High-pressure air-water flushing
This flushing method uses high-pressure water flow and gas to flush the inner walls of the toilet bowl. Its advantages are evident. It has a high flushing pressure and a wide range, requiring only one-fifth of the normal water volume to clean the toilet bowl thoroughly, greatly saving water resources. In terms of flushing control, it is jointly accomplished by an infrared sensor and a computer intelligent system. When the user finishes using the toilet, the infrared sensor detects the departure of the human body and sends a signal to the computer intelligent system, which then triggers the flushing device to flush.
Foam flushing
The equipment room is equipped with an automatic foaming machine that can generate a large amount of foam, covering the toilet bowl with a layer of snow-white foam. This process uses the foam produced by the mixture to replace conventional flushing, saving water resources while effectively blocking the emission of odors and keeping the air inside the toilet fresh.
Manual push-button flushing
There are round or square buttons on the top or side of the water tank. When the user presses the button, the water stored in the tank flows into the toilet bowl through pipes. Some products require the button to be held down or pressed twice to complete the flushing process. This flushing method is simple and straightforward but requires the user to actively press the button.
Foot-pedal flushing
Gently step on the foot-pedal device at the bottom or side of the toilet bowl, and use the lever principle to open the water tank valve, allowing water to flow into the toilet bowl for flushing. When the user releases the pedal, the valve automatically closes to stop the flushing. This method prevents the user from touching the flushing device with their hands, making it more hygienic.
Electric induction flushing
Some high-end mobile toilets are equipped with infrared sensors. When the user approaches or leaves after using the toilet, the infrared sensor automatically triggers the flushing. At the same time, some products also have a side "manual flush" button as a backup in case the infrared sensor fails and cannot flush normally.
Water-flushing and waterless suction-type
Water-flushing mobile toilets have a water tank inside and a sewage tank at the bottom; waterless ones have no flushing device and directly collect the excrement into the sewage tank. These two types of mobile toilets have relatively small sewage tank capacities and need to be suctioned in a timely manner to ensure normal use of the toilet.
Recirculating water flushing
It adopts intermittent aerobic and anaerobic treatment technologies, combined with biofilm technology to accelerate the fermentation and decomposition of fecal sewage. The treated sewage is then recirculated for flushing. This method not only saves water resources but also reduces the number of times the fecal sewage needs to be suctioned.
Dry-packing type
There is no flushing device. The excrement is received by a biodegradable plastic bag, which is automatically replaced with a new one after each use and then collected and processed centrally. This method saves water resources and is convenient for collecting and processing waste.
