Multi-functional Mobile Toilet Production
Multi-functional mobile toilets can be made using materials such as water storage barrels, water storage tanks, pallets, and PVC pipes. Here are the specific production methods:
Production using water storage barrels:
First, split the water storage barrel in half lengthwise and fix universal wheels at the four corners of a wooden board for mobility. Use wooden strips and self-tapping screws to increase the height of the barrel and create an opening on the side as the doorway. Install sponge strips to form the door frame, embed plastic soft panels to create the walls, and use the upper part as the roof. Drill a hole at the bottom of the barrel to install a drain pipe to form a floor drain, drill holes on the side to connect direct joints, and also drill a hole at the bottom of the barrel to install a joint. Place a plastic bucket as a small water storage device, connect water pipes to make a bath heater, install a toilet and a water tank, and fix the drain pipe to the sewage tank. Finally, extend the water pipe to the doorway as the inlet pipe for the sink, and install a hose and a drilled door as the outlet for the sink.
Production using water storage tanks and pallets:
Fix universal wheels at the four corners of the bottom of a pallet and place water storage tanks recovered from garbage stations on it. Use an angle grinder to cut the top of the water storage tank to form an open tank body, and invert and fix another open-top water storage tank. Cut rectangular openings on the outer frame and the body of the water storage tank as the doorway, and drill a hole in the interior floor to install elbows and water pipes as the drain. Place the toilet and secure it with glue, fix the water pipes to install a faucet, and use a stainless-steel basin below to make and fix a sink. Connect the inlet pipe of the toilet water tank and the shower hose, install a shower bracket and a toilet seat, and make a spray-type showerhead. Finally, fix hinges and wooden boards on the frame of the water storage tank to form the door of the toilet, and install a door handle.
Production of a mobile toilet-style commode using PVC pipes:
Prepare materials such as plastic lids, straight pipes, and tees. Use an electric drill to make holes and fix the wheel assemblies. Assemble the two side bracket parts, install straight pipes and elbows to form the base frame, and attach the wheel covers. Extend the straight pipes vertically upwards, install wooden board footrests, bases, backrests, etc., and secure them with screws. Add plastic pipes on the front as handrails, use hoses for edge wrapping, and cut circular holes as the commode openings.
