Back to blog
Article

Mohe City Container House Installation

Admin September 15, 2026

The installation of container houses in Mohe City needs to be combined with local climatic characteristics and regulatory requirements, with a focus on product adaptability, installation process, and compliance, as detailed below:

I. Product Adaptability Requirements
In winter, Mohe experiences extremely low temperatures, reaching as low as minus thirty to forty degrees Celsius, along with heavy snowfall. This places special demands on the thermal insulation, structural strength, and airtightness of container houses. It is necessary to select products with high-strength steel frames, wall insulation materials (such as polyurethane), and tightly sealed doors and windows to ensure stable internal temperatures in low-temperature environments. For example, the container house series from Heilongjiang Huamao Equipment Manufacturing Co., Ltd. has undergone special treatments in wall insulation, door and window sealing, and bottom moisture-proofing, making them suitable for the climatic conditions in Mohe.

II. Key Points of the Installation Process

  1. Foundation Preparation: Container houses have relatively low requirements for ground foundations, but it is essential to ensure that the ground is level and solid. For permanent structures, it is recommended to pour concrete foundations or lay ground beams to enhance stability.
  2. Bottom Frame Installation: Connect the bottom corners of the container to the bottom beams using hexagon socket bolts, adjust the diagonal differences of the bottom frame to be ≤3mm, and then tighten the bolts.
  3. Secondary Beam and Floor Installation: Install and secure π-shaped secondary beams, lay magnesium oxide board substrates, mark and lay the floor along the centerline, and fix it with cross-head燕尾丝 (Note: '燕尾丝' may be a specific term; if it refers to a type of screw, it can be translated as 'dovetail screws' or kept as is if no direct translation exists), spaced at intervals of 300-350mm.
  4. Sealing and Moisture-Proofing: After sanding the floor joints, apply PVC-specific floor adhesive, lay the floor covering, and expel air. Weld the joints to enhance waterproofing.

III. Compliance and Approval
According to the special rectification implementation plan issued by the Mohe Municipal People's Government, housing construction and decoration must be uniformly planned and approved by the government. Container houses intended for permanent residence or commercial use must be submitted to the local housing and construction department for approval, with clear documentation on usage, structural safety, and fire safety inspections to ensure compliance with the 'Regulations on the Safety Management of House Use in Heilongjiang Province'. Temporary uses, such as for construction site offices, also require reporting to avoid being identified as illegal constructions.

IV. Supplier Selection Recommendations
Prioritize suppliers with localized service capabilities, such as Heilongjiang Huamao Equipment Manufacturing Co., Ltd. Their products are optimized for cold regions and can provide complete services from design to installation, shortening delivery cycles and reducing post-maintenance costs.