Mobile Unit Toilet

A mobile unit toilet, also known as a mobile toilet, is a facility that can be moved as a whole and provides toilet services to the public. The following is an introduction from several aspects including composition, classification, characteristics, applicable places, design principles, and selection suggestions for factory and construction site use:

Composition: It generally consists of a fecal sewage storage tank (or fecal sewage treatment device), floor slab, sanitary ware, walls, washing equipment, water tank, roof, and mobile device, etc.

Classification:

• By structural form: It is divided into single-structure mobile toilets and composite-structure mobile toilets. The single-structure type is relatively independent and simple, while the composite-structure type may integrate more functions or adopt a more complex construction.
• By moving method: There are lifting and handling-type mobile toilets, which rely on lifting equipment or manual handling for movement; and powered and towed-type mobile toilets, which are moved with the help of power devices or vehicles.
• By sewage treatment method: It includes water-flushing and waterless-flushing suction-type mobile toilets. The former uses water for flushing, while the latter treats feces through suction; the circulating water-flushing type mobile toilet can recycle the flushing water; and the dry-packing type mobile toilet packs the feces for treatment without using water.

Characteristics: It can be conveniently transported to any place where a toilet needs to be set up and can be used repeatedly. It has the advantages of being movable, combinable, and easy to transport.

Applicable places: It is suitable for stations, docks, tourist attractions, villa areas, newly built residential areas, large construction sites, squares, densely populated public places, and bustling commercial streets, etc.

Design principles: It should follow the principles of being easy to move, economically durable; environmentally friendly and beneficial to the environment; improving efficiency and promoting humanity. The overall structure should be lightweight, using lightweight and durable materials as much as possible while being sturdy; the height and width of the toilet should also be controlled during design; and the mobile device should be fully considered for completeness and rationality.

Selection suggestions for factory and construction site use: For mobile toilets in factories and construction sites, an economical and practical model can be selected, with a floor width of 1.6 meters, a double-tonnage design, and a widened roof eave. This design can better meet the needs of densely populated and frequently used factory and construction site personnel while taking into account both economy and practicality.