Mobile Toilet Wall Tiling

Mobile toilet wall tiling should be approached from four aspects: material selection, pre-construction preparation, in-construction details, and post-construction considerations.

Material Selection

Select tiles based on the lighting, size, and humidity of the mobile toilet. When purchasing, be sure to check the quality of the materials to ensure the tiles are flawless and uniformly textured; verify that the dimensions meet requirements to avoid affecting the overall tiling effect due to size discrepancies; and also check the radiation health certificate to ensure the tiles' radioactivity complies with safety standards, safeguarding the health of users.

Pre-construction Preparation

Prepare both materials and tools thoroughly. In terms of materials, in addition to tiles, you will need to prepare adhesive materials such as cement mortar, tile adhesive, or tile back adhesive. For tools, prepare a laser level, rubber mallet, notched trowel, tiling tools, etc. These tools play a crucial role in the subsequent construction process, ensuring the flatness and firmness of the tiling.

In-construction Details

• Cement Mortar Humidity: Controlling the humidity of the cement mortar is crucial. Too dry or too wet mortar can affect the adhesion between the tiles and the wall. Apply the cement mortar evenly and sufficiently on the back of the tiles, ensuring uniform application to avoid hollow spaces.
• Tile Tapping and Inspection: After attaching the tiles to the wall, gently tap them with a rubber mallet while carefully checking the flatness and adhesion of the tiles. If insufficient cement is found, add more promptly; if there is too much cement, reduce it appropriately. Repeat this process until the tiles are evenly installed on the wall.
• Gap Reservation: For newly laid tiles, as the cement is not fully dry, they are susceptible to sinking due to gravity. Therefore, after attaching the tiles to the wall, reserve a certain gap between the upper and lower tiles. If the gap is too small, it may cause the glaze to crack during expansion and contraction, reducing the lifespan of the tiles.

Post-construction Considerations

Tile maintenance is an important aspect. Protect the tile surface before use to avoid damage. When carrying out subsequent work after laying the tiles, take protective measures to prevent scratching the tiles after completing the wall covering, such as placing boxes on the tiles at the bottom of the wall and avoiding contact with the tile surface when moving bathroom fixtures and construction tools.