Introduction to Mobile Toilet Vehicle Models

There are mainly three models of mobile toilet vehicles: the Sinotruk Howo Logistics Support Mobile Toilet Vehicle, the Large Mobile Public Toilet Vehicle (Chengli Environmental Sanitation Vehicle), and the Dongfeng Mobile Toilet Vehicle. Here are the specific introductions:

Sinotruk Howo Logistics Support Mobile Toilet Vehicle: The chassis adopts the Sinotruk Howo 4*2 National VI chassis, with an engine power of 257kw, exceeding the 220KW specified in the bidding documents. It is equipped with radial steel-cord tires and a double-door integrated cab. The upper structure is made of high-quality carbon steel plates, with anti-rust and anti-fatigue properties meeting national standards. The walls are a framework structure filled with polyurethane, and the vehicle can accommodate the sanitary needs of 8 people, with separate areas for men and women and 3 urinals. The roof of the vehicle is made of non-slip patterned aluminum plates, and the door structure is made of anodized aluminum profiles, with embedded parts for all openings and load-bearing components, and silicone applied to the gaps. The vehicle is equipped with a roof ladder, a silent generator that can be fueled by the chassis fuel tank, and one 1.5P air conditioner installed in each of the men's and women's areas. There are exhaust fans on the top and in the compartments of the sanitary area, and each compartment has independent lighting, coat hooks, and other facilities. There are 6 vacuum-suction squat toilets made of 316 stainless steel and 2 sit-down toilets. The vacuum pump has a power greater than 2KW, and there are 2 sets of sinks with independent faucets and auxiliary facilities. There are three water tanks in total, with a gray water tank of 500L. The vehicle has an overall control cabinet inside, a dedicated sewage pump with a motor power greater than 1.5KW, and warning lights on the roof and tail.

Large Mobile Public Toilet Vehicle (Chengli Environmental Sanitation Vehicle): It is modified using a Class II chassis. The entire vehicle is made of a sandwich structure with outer cold-rolled steel plates and inner UV boards, and the internal steel frame of the walls is filled with insulation material. It is equipped with built-in sewage pipes, water pipes, and lighting and power supply equipment, suitable for environments where water and power can be connected. The floor of the mobile toilet is made of non-slip 304 stainless steel patterned plates, with separate areas for men and women, and each squat position has an independent partition. The men's area is equipped with an integrated urinal.

Dongfeng Mobile Toilet Vehicle: It can be customized with various materials, sizes of squat positions, and configurations for mobile toilets and mobile toilet vehicles. The front door of the mobile vehicle toilet is for the ladies' restroom, and the rear door is for the men's restroom and urinal area. It uses lightweight, waterproof, shock-resistant, and easy-to-clean precision boards, with stainless steel connectors. There are separate sinks for men and women, equipped with stainless steel fresh water tanks and sewage tanks, and stainless steel handrails and other auxiliary configurations. The fresh water tank has a quick water inlet at the top, and the sewage tank has both direct drainage and suction drainage functions. It is equipped with an on-board air conditioner and high-pressure air sources inside the vehicle for water conservation. The material is a sandwich structure, suitable for the climate conditions across the country, with built-in sewage pipes and other equipment, suitable for environments where water and power can be connected.