Mobile Toilet Tile Cabinet Tutorial

No detailed tutorial specifically for 'mobile toilet tile cabinets' has been found yet, but the general process of making regular tile cabinets can be referred to for the following steps. Design parameters and material selection need to be adjusted according to actual needs in mobile toilet scenarios:

I. Design Phase

1. Size Planning
   • Base Cabinet Height: It is recommended to design it to be about 85 centimeters including the countertop, with an adjustment foot height of 10 centimeters, a countertop thickness of 5 centimeters, and a cabinet body height of about 65 centimeters. When the space in the mobile toilet is limited, the height can be appropriately reduced to 75-80 centimeters to save space.
   • Wall Cabinet Height: Determine it according to the height of the toilet ceiling. If the ceiling height is 2.3 meters, the wall cabinet height can be set to 90 centimeters. Avoid ventilation ducts or lighting fixtures to prevent collisions.
   • Cabinet Depth: The recommended depth for base cabinets is 56 centimeters, and for wall cabinets, it is 35 centimeters. In mobile toilets, it can be reduced to 40-50 centimeters (base cabinets) and 25-30 centimeters (wall cabinets) to adapt to the narrow environment.

II. Material Preparation

1. Basic Materials: 800×800 tiles (for cabinet bodies), steel bars or aluminum square tubes (for frame support), marble glue or glass glue (for bonding), cement and sand (for the base of the platform), and red bricks (optional frame reinforcement).
2. Functional Accessories: Slide rail hardware (for pull-out cabinets), adjustable bottom support frames, wood-grain panels (for cabinet doors), and edge-banding lines (for beautifying edges).
3. Tools: Level, electric drill, cutting machine (for tile trimming), tape measure, and marking pen.

III. Installation Phase

1. Base Construction
   • Ensure the ground is level. Use tiles and glue to make keels and build a 5-centimeter-high platform (or directly stand tiles on the ground, with keels fixed in advance).
   • Lay the first baseboard tile and bond it firmly with marble glue.
2. Erecting Facade Tiles
   • Stand the tiles upright according to the design layout, fix the edges with glue, and reserve openings for sinks and drain pipes.
3. Overall Assembly
   • Install the metal frame and adjust the size to match the tile structure.
   • Install the tile cabinet bodies layer by layer, bond the gaps with glue, and add adjustable support frames at the bottom.
   • Install the slide rails for pull-out cabinets and embed multiple drawers or cabinet doors (wood-grain panels can be used for cabinet doors to reduce weight).
   • It is recommended to use lightweight materials (such as PVC boards) instead of tiles for wall cabinets to avoid weight-bearing issues.
   • Finally, install the countertop (quartz stone or moisture-proof board can be selected) and seal the edges to prevent water seepage.

IV. Precautions

1. Water and Electricity Pre-embedding: Plan the routes of drain pipes and electrical circuits in advance and reserve opening positions to avoid damaging the tiles by drilling later.
2. Moisture-proof Treatment: Due to the high humidity in mobile toilets, apply waterproof coating inside the cabinet bodies and seal the tile joints with glass glue.
3. Ventilation Design: Reserve ventilation holes at the back or bottom of the cabinet bodies to prevent the accumulation of moisture.
4. Mobile Adaptation: If frequent movement is required, simplify the fixed structure (such as reducing the use of cement) and add detachable connectors.