Installation of Mobile Toilet Storage Tool
"Mobile toilet storage tool" is not a standard product name, and there is currently no unified installation method, but installation references can be provided based on common types of bathroom storage tools:
Installation of Mop Storage Tools
If the storage tool is a suction-cup mop hanger, its installation relies on special suction-cup technology. Before installation, ensure that the wall surface is smooth without bumps, dust, or oil stains, otherwise the suction cups will not adhere tightly. During installation, align the suction cups of the hanger with the wall, press firmly and hold for 10-15 seconds to expel the air inside the suction cups, creating a negative pressure environment for fixation. Some hangers are equipped with adjustable buckles. After installation, the width of the buckles can be adjusted according to the thickness of the mop handle (such as a round handle with a diameter of 2-4 cm or a square handle with a side length of 3-5 cm) to ensure stable hanging of the mop.
Installation of Shelf-type Storage Tools
If it is a wall-mounted shelf, the installation position needs to be determined in combination with the height of the toilet. It is generally recommended that the bottom of the shelf be 20-30 cm away from the top of the toilet tank to avoid affecting use and facilitate access to items. During installation, first use a laser level to mark a horizontal line on the wall to ensure that the shelf plate is not tilted after installation; then use an electric drill to make holes at the joints of the wall tiles (avoiding the fragile edges of the tiles). The depth of the holes should match the length of the expansion screws (for example, a 5 cm expansion screw requires a hole depth of 5-6 cm); finally, insert the expansion screws into the holes, tighten the nuts to fix the shelf brackets, and then install the shelf plates.
Installation of Storage Tools around the Toilet
If the storage tool involves toilet relocation or pipe storage (such as a combination of a toilet relocator and a storage box), first select a relocator of an appropriate length according to the bathroom layout (usually available in various specifications from 10-30 cm). Before installation, accurately measure the center distance between the floor and the toilet drain outlet to ensure that the two ends of the relocator are aligned with the drain outlet; during installation, check the quality of the pipe fittings (for example, PVC materials should be free of cracks or deformations), and connect the pipe fittings according to specifications (such as applying special glue to the interfaces and then rotating them in for insertion) to avoid blockages or sewage backflow caused by improper installation. If it is a storage box for the space above the toilet, it can be placed directly on the top of the toilet tank (confirm the load-bearing capacity of the tank) or fixed to the wall with nail-free glue (clean the wall and keep it dry, press for 2-3 minutes after applying the glue for fixation).
