Usage Method of Mobile Toilet Seat

The usage methods of mobile toilet seats vary depending on their types, as detailed below:

Portable Mobile Toilet

• Fixed Toilet: This type of toilet features a snap-button design. Pressing both snap buttons simultaneously releases them, allowing the relevant components to be removed. When placing the toilet, ensure it is in a stable position and secure all components with the snap buttons to prevent shaking or displacement during use.
• Usage Process: Simply open the toilet for use. After use, it can be flushed directly downward. The toilet can be filled with water, and when full, it generates a flushing effect, using the force of the water to wash away waste and keep the interior clean.
• Post-Use Cleaning: After use, press down and press the snap buttons to remove the components. Below is a black tank used for collecting waste. When the black tank is nearly full, it should be emptied and appropriately cleaned and disinfected to prevent odors and bacterial growth.

Smart Toilet (Taking the Huihuang E95 Smart Toilet as an Example)

• Pre-Use Preparation: First, open the angle valve to check for leaks and ensure the water supply is normal. Check if the external dry battery circuit is connected; once connected, the side button can be used for flushing during power outages. Then, plug in the power supply and press the reset button to bring the toilet into normal operation.
• Initial Startup Settings: Before starting the foam shield for the first time, add foam agent, which reduces adhesion between waste and the toilet bowl while also deodorizing. For the first use, long-press the on/off button to activate the automatic lid-opening function triggered by human presence, and use foot sensing to close the full lid and automatically flush for user convenience.
• Cleaning Function Operation: Press the butt-washing button, and the spray rod extends to activate the fixed butt-washing function. Press the rear or front button to adjust the spray rod's extension and retraction, and press the plus or minus buttons to adjust the butt-washing water pressure. Press the butt-washing button again to switch to mobile cleaning, and press the stop button to end cleaning. Users can choose the appropriate cleaning method and parameters according to their needs.
• Other Function Operations: Short-press the warm air button to activate the warm air function. In warm air mode, continuous short presses cycle through temperature settings from room temperature to five levels. Short-press the seat temperature button to switch seat temperature settings. Short-press the corresponding buttons on the remote control to activate corresponding functions. Long-press the night light button to turn the night light's smart mode on or off. First, hold down the stop button and press the night light button to turn the automatic foam dispensing function on or off. Long-press the lid-opening button to turn the automatic lid-opening function on or off. For more function operations, refer to the instruction manual.