Mobile Toilet Renovation Video Tutorial

No complete video tutorial for mobile toilet renovation has been found yet, but you can refer to the following text steps for renovating a mobile toilet using a water storage tank:

Preliminary Preparation

Prepare materials and tools such as a water storage tank, angle grinder, wooden board, universal wheels, wooden strips, self-tapping screws, sponge strips, plastic soft boards, drainage pipes, plastic buckets, straight connectors, a water pipe-made bath heater, a toilet and its water tank, glass glue, and a sewage bucket.

Specific Renovation Steps

1. Cut the Water Storage Tank: Use an angle grinder to split the water storage tank in half to prepare for constructing the main structure of the toilet.
2. Make a Mobile Base: Fix universal wheels at the four corners of the wooden board so that the renovated toilet can be easily moved.
3. Increase the Height of the Tank: Use wooden strips and self-tapping screws to increase the height around the water storage tank to meet the internal space requirements of the toilet.
4. Create an Entrance: Cut an entrance at an appropriate position on the side of the water storage tank for easy access.
5. Build a Door Frame: Install sponge strips to build a door frame, which serves as a seal and buffer.
6. Form Elevated Walls: Embed plastic soft boards to form elevated walls, enhancing the privacy and stability of the toilet.
7. Construct a Roof: Place the upper half of the water storage tank on top of the wooden strips to form a roof, providing shelter from wind and rain.
8. Install a Floor Drain: Cut a hole at the bottom of the tank and install a drainage pipe to form a floor drain for easy sewage discharge.
9. Set Up a Water Storage Device: Cut holes on the side and bottom of the plastic bucket and connect them with straight connectors. Place the plastic bucket on the roof to form a small water storage device, providing water for the toilet.
10. Install a Bath Heater: Connect the water pipe-made bath heater to provide heating and lighting functions.
11. Install a Toilet: Place the toilet and install its water tank, fixing it with glass glue to ensure stability.
12. Connect the Sewage System: Connect the drainage pipe to the sewage bucket to achieve centralized sewage discharge.
13. Set Up the Inlet Pipe for the Washbasin: Horizontally connect a water pipe to the three-way outlet pipe and extend it to the entrance as the inlet pipe for the washbasin for convenient use.
14. Install Door Connectors: Cut holes on the door and install connectors to complete the functions of the toilet.