Mobile Toilet Model Making Process

The process of making a mobile toilet model mainly involves a specific case of using a water storage tank to create a movable toilet. The specific steps for making a solar-powered mobile toilet using a water storage tank are not provided. Here is the detailed process of making a movable toilet using a water storage tank:

1. Basic Structure Construction: First, select an appropriate water storage tank and use an angle grinder to precisely split it in half to provide basic materials for subsequent construction. Next, fix universal wheels at each of the four corners of a wooden board. This design allows the entire mobile toilet to be easily moved to different locations to meet usage needs in various scenarios. Then, use wooden strips and self-tapping screws to fix wooden strips on the upper side of the tank, increasing the height to provide space for installing other components. At the same time, create an entrance on the side of the water storage tank for people to enter and exit.
2. Wall and Roof Construction: Install sponge strips to form the door frame. Sponge strips have a certain degree of flexibility and sealing properties, ensuring the stability of the door frame. Embed plastic soft panels into the door frame to form elevated walls. Plastic soft panels are lightweight and waterproof, making them suitable as wall materials. Place the upper half of the water storage tank on top of the wooden strips as the roof, providing shelter from wind and rain for the entire mobile toilet.
3. Appearance Enhancement and Door Making: To improve the aesthetics of the mobile toilet, apply white waterproof paint to the wooden strips. The waterproof paint not only protects the wooden strips from moisture damage but also makes the appearance neater. Use foam strips to拼接 (here, 'splice' can be used as a proper English word to replace the Chinese term which means connecting pieces together) discarded honeycomb wooden boards to make a simple door, achieving resource reuse and reducing production costs.
4. Drainage and Water Storage System Installation: Create a hole at the bottom of the tank and install a drain pipe to form a floor drain, ensuring that sewage in the toilet can be smoothly discharged. Make holes on the side and bottom of the plastic tank, connect direct joints, and place it on the roof to form a small water storage device for storing clean water.
5. Sanitary Equipment Installation: Connect a bath heater made of water pipes to provide heating and ventilation functions for the toilet. Install a three-way joint below the water inlet pipe and connect a showerhead for people to clean themselves. Place a toilet and install a water tank, and fix the toilet with glass glue to ensure its stability. Connect the drain pipe to a sewage tank to achieve centralized sewage discharge. Connect a water pipe horizontally to the three-way joint of the outlet pipe and extend it to the door as the water inlet pipe for the sink. Install joints and connect hoses. Make a hole in the door to install joints and complete the sink facilities.