Mobile Toilet Indoor Installation

The general steps for indoor installation of a mobile toilet (mobile commode) are as follows:

1. Check the completeness of accessories After opening the package, verify that all components are present, including the upper and lower tank bodies, buckles, backrest, armrests, seat ring, lid, inner tank, anti-slip mats, and tissue box. If any parts are missing or damaged, contact the supplier promptly for replacements to avoid interruptions during installation.

2. Install anti-slip mats Insert the silicone anti-slip mats into the four corners of the bottom of the mobile commode, ensuring a flat contact surface with the floor. The anti-slip mats enhance stability, preventing the commode from tipping over due to wet floors or external forces during use, especially in indoor environments with tiles or smooth floors.

3. Assemble the tank structure Align the connecting parts of the upper and lower tank bodies, press the buckles downward until they are fully engaged, and then check the firmness of the buckles by gently tapping or shaking. This step ensures good sealing between the upper and lower tank bodies to prevent leaks or odor diffusion during subsequent use.

4. Install the backrest and armrests Align the backrest with the holes at the rear of the tank body and press vertically until the buckles are locked. Then, install the armrests one by one, securing the buckles on the backrest side first, followed by the front side. Pay attention to matching the direction of the armrests with ergonomics to ensure comfort during use.

5. Secure the seat ring and lid Align the seat ring with the holes at the edge of the tank body and press evenly on both sides until the buckles are fixed. Then, align the lid with the buckles above the seat ring and press down vertically to complete the installation. Some models may require additional installation of buffer devices, refer to the instructions for operation.

6. Insert the inner tank and accessories Place the inner tank inside the tank body, install the front handle first, then secure the rear handle to ensure a tight fit between the inner tank and the tank body. Finally, install the tissue box and close the protective cover. The inner tank should be cleaned regularly, and it is recommended to choose a design with handles for easy replacement.

Precautions:

• Model differences: The positions of the buckles or the number of accessories may vary among different models (e.g., H76 and H80). Follow the instructions or video tutorials specific to your model strictly.
• Floor requirements: Ensure that the indoor floor is flat and dry before installation to prevent the commode from wobbling due to uneven surfaces. If the floor slope exceeds 5°, use shims for adjustment.
• Safety test: After installation, gently push the commode to test its stability and check for any loose parts to ensure safe use.

For further details on specific models, contact customer service for exclusive tutorials.