Mobile Toilet Homemade Toilet

You can refer to the following methods for making a homemade mobile toilet:

Method 1: Using materials such as toilet seat covers, plaster, and bottle caps First, replicate the outline of the toilet seat cover. Pour plaster into the mold to make the cover plate. After it dries, use a polishing machine to polish the surface until smooth, and then demold it from the alginate. Select colorful bottle caps and arrange them neatly on the plaster board. Use a hot air gun to soften the bottle caps so that they melt and adhere. Apply glue on the back and cover it with foil for beautification, creating a dazzling gold-textured toilet seat cover. For the toilet seat ring, disassemble flip-flops and keep the sole parts. After splicing them, mark the outline with reference to a finished toilet seat ring and cut it. Wrap the edges with a fluffy blanket to enhance comfort. Finally, combine the cover plate with the modified toilet seat ring to form a mobile toilet seat. This method requires attention to the curing time of the plaster and the control of the melting temperature of the bottle caps to avoid material deformation.

Method 2: Using discarded tiles Place the toilet on the tile and use a ruler to draw a red marking line along the edge of the toilet. After moving the toilet away, use an angle grinder to cut out a rectangular tile block slightly larger than the bottom of the toilet. Turn the tile over and install universal wheels at the four corners: first mark the drilling points with a marker pen, then drill screw holes with an electric drill, insert the screw rods and tighten the nuts for fixation, and finally use an angle grinder to cut off the protruding screw rods on the back. Put the toilet back on the tile, mark the position of the drain outlet, and insert a hose from the bottom and fix it. Use white cement to bond the toilet and the tile. After installing accessories such as the water tank and toilet seat cover, connect the drain hose to the drain pipe and the water tank to the water inlet pipe for use. This method requires ensuring the cutting accuracy of the tile and the load-bearing capacity of the universal wheels to avoid displacement during use.

Method 3: Using empty buckets or mineral water buckets

• Empty bucket plan: Use an empty bucket directly as a toilet seat, which is suitable for temporary use indoors in winter. No complex modification is required, but attention should be paid to the stability of the bucket body and anti-slip treatment.
• Mineral water bucket plan: Take an empty 5-jin mineral water bucket, insert a plastic tube and connect it to a small bottle cut in half (wrap the bottle mouth and the plastic tube tightly with tape). Before use, hang curtains in the car to ensure privacy and place the toilet in the front passenger seat or the back seats. Use the small bottle to catch urine when urinating. When defecating, lay plastic bags or paper towels in the bucket. After use, pour out the waste and clean it with disinfectant. This method requires regular cleaning and disinfection of the container to avoid odor residue.

You can choose the above methods according to the difficulty of obtaining materials and the usage scenario. When making modifications, prioritize ensuring structural stability and hygiene, and avoid using flammable or toxic materials.