Mobile Toilet Folding Tutorial

The folding tutorial for mobile toilets should be carried out according to the specific type. The cleaning and storage methods for common simple and modular folding toilets are as follows:

I. Folding and Cleaning of Outdoor Simple Mobile Toilets

These toilets are usually temporarily built with basic materials, and the folding and cleaning steps are relatively simple:

1. Remove the support structure: Pull out the four load-bearing pipes or sticks from the fixed positions of the C-shaped toilet seats. If the pipes are of a telescopic design, they should be retracted to the shortest state for easy storage.
2. Handle the garbage bags: Seal and remove the garbage bags placed on the toilet seats to prevent leakage of waste. If biodegradable materials are used, they can be classified and disposed of according to environmental protection requirements; if ordinary plastic bags are used, they should be put into garbage recycling points.
3. Store the shelters: If a tent is used as a shelter, first remove the fixing ropes and ground stakes, and fold the tent cloth neatly. If a nylon cloth is used in combination with an umbrella, remove the umbrella and fold the umbrella ribs, and fold the nylon cloth separately.
4. Fixing and wind protection: If stones are used to press down the nylon cloth or the bottom of the tent during construction, remove the stones and check whether there is any debris left on the site to ensure a clean environment.

II. Storage of Modular Folding Toilet Systems (The specific steps are not provided in the reference information, but the operation logic can be inferred)

These toilets are composed of seven rotatable modules and should be folded according to the designed order:

1. Close the functional modules: Return movable components such as showers, shower heads, and washbasins to their original positions to ensure that the piping system is not compressed. For example, the shower head should be returned to the fixed bracket, and the washbasin drawer should be fully closed.
2. Rotate and store the modules: With the central axis as the core, rotate each module along the axial direction to a compact state. The small doors on both sides of the toilet (for storing toilet paper and toilet brushes) should be closed and locked to prevent items from falling out.
3. Protect the piping system: Reset the back cover that was opened during maintenance to ensure that the pipes are hidden inside the central axis. If the system is equipped with a drain valve, close the valve to prevent leakage of residual water.
4. Overall fixing and handling: After folding, the occupied area is reduced from 2㎡ to 0.4㎡. Check whether the connections between the modules are secure, and use the matching straps for fixing if necessary to facilitate transportation or storage.

Precautions: Read the product manual before operation to confirm the rotation direction and load-bearing limit of the modules; avoid using corrosive cleaners during cleaning to prevent damage to the material surface.