How to Install Floor Tiles in Mobile Toilets

There are mainly two methods for installing floor tiles in mobile toilets: dry-laying method and joint-laying method. Here are the specific introductions:

Dry-Laying Method

• Key Operation Points: This method does not require the use of cement mortar, nor does it require pre-soaking the tiles in water. Tiles can be laid directly in a dry state. However, it is essential to ensure that the tile adhesive is of good quality to ensure that the tiles are firmly attached. During laying, use a free-laying method to allow the tiles to naturally settle into their respective positions.
• Joint Treatment: A certain gap must be left between each tile, which is then filled with tile grout. Tile grout has advantages such as waterproofing, mold resistance, and aesthetics. It can effectively prevent water from seeping through the gaps, preventing issues such as tile loosening and mold growth caused by water penetration. At the same time, it enhances the overall aesthetic appeal, making the floor of the mobile toilet look cleaner and more refined.

Joint-Laying Method

• Key Operation Points: During the tile-laying process, appropriate gaps must be left between each tile. The size of these gaps can be determined according to actual needs and design requirements. Then, use cement or tile filler to fill the gaps. Cement is a traditional filling material with low cost, but it may be relatively weak in terms of aesthetics and waterproofing. Tile filler, on the other hand, has better waterproof and stain-resistant properties and comes in a variety of colors, allowing it to be matched with the color of the tiles to create a more unified overall effect in the bathroom.
• Aesthetic Effect: By leaving gaps and filling them, a neat and orderly visual effect can be created, enhancing the aesthetic appeal of the mobile toilet. Moreover, appropriate gaps can also alleviate the stress caused by thermal expansion and contraction of the tiles to a certain extent, reducing the occurrence of issues such as tile cracking and arching.

In addition, when it comes to the relationship between squat toilet installation and floor tiles in mobile toilets, there are two situations to note. If the squat toilet is installed after laying the floor tiles, it is generally not necessary to knock out the tiles when dismantling the squat toilet later. If the squat toilet is installed first and then the floor tiles are laid, knocking out the tiles will be necessary when dismantling the squat toilet, and the floor must be re-waterproofed after the tiles are damaged to ensure that the waterproof performance of the mobile toilet is not compromised.