How to Use Mobile Toilet Door Stickers

The use of mobile toilet door stickers can be carried out according to the following steps:

Preparation

• Clean the door surface: Use a cleaning agent or alcohol cotton to wipe the sticking area, removing oil stains, dust, and other impurities. Ensure the door surface is clean and dry, which will make the sticker adhere more firmly and prevent it from falling off due to surface dirt.
• Prepare tools: Get ready tools such as a scraper, ruler, and scissors. The scraper is used to remove air bubbles between the sticker and the door surface, making the sticker fit more closely. The ruler can assist in measuring the sticking position to ensure the sticker is placed accurately. The scissors are used for cutting the sticker.

Design content

• Be concise and clear: The text content should be concise, with the number of words controlled within 20 characters, such as 'Pull gently and close slowly. Thank you for your cooperation'. Also, the font size should be ≥ 3cm to ensure it can be clearly seen from a certain distance.
• Use icons for assistance: You can pair it with universal warning symbols, such as exclamation marks or palm icons, to enhance the recognizability of the sticker and enable people to understand its meaning more quickly.

Sticking operation

• Position selection: The sticker should be placed at the average eye-level height of adults, approximately between 1.5 meters and 1.7 meters, for easy viewing. At the same time, avoid sticking it in the sliding area of the door panel, such as above the track or on the edge of the door frame. If multiple doors need to have reminders, it is recommended to use a unified position, for example, stick them all in the top right corner.
• Sticking skills: First, tear off one corner of the sticker, align it with the determined position, and then slowly stick it. Use a scraper to remove air bubbles from the center of the sticker to the surroundings. If the sticker is large, you can gradually stick it from the middle to both sides or from one end to the other. During the process, avoid wrinkles or air bubbles on the sticker. If air bubbles occur, you can gently make a small cut at the air bubble with a paper cutter, then squeeze out the air with your fingers and smooth the cut.

Trim the edges

After sticking, use a paper cutter to trim the excess edges of the sticker neatly, making the sticker fit perfectly with the edge of the door and enhancing the overall aesthetics.

Inspection and adjustment

After sticking, carefully check whether the sticker is flat, firm, and free of problems such as lifted edges or air bubbles. If any issues are found, they need to be adjusted and dealt with in a timely manner to ensure the normal use of the sticker.

Precautions

• Prioritize choosing PVC stickers with removable adhesive. This way, when you need to replace or tear off the sticker, you can avoid leaving marks on the door surface.
• If the sticker is used outdoors or in a humid environment, choose a waterproof UV film with a recommended thickness of 0.1mm - 0.3mm to ensure the service life and effect of the sticker.