Mobile Toilet Construction Process

The construction process of mobile toilets can be divided into three types based on different manufacturing methods: construction using storage tanks and pallets, installation of complete finished products without civil engineering, and conventional construction processes. Details are as follows:

Construction Using Storage Tanks and Pallets

1. Basic Assembly: Use tools to fix universal wheels at the four corners of the pallet bottom to ensure mobility; place the recycled storage tank on the pallet and use an angle grinder to cut along the marked line at the top of the storage tank to remove the top, forming an open tank.
2. Tank Assembly: Invert another open-top storage tank and stack it on the first tank, securing the outer frame with self-tapping screws to form a double-layer structure; cut out rectangular openings (for ventilation or equipment installation) and a doorway (for personnel access).
3. Internal Facility Installation: Drill holes in the floor inside the storage tank, insert elbows, and connect them to water pipes for sealing; install and secure the toilet, ensuring a tight connection between the sewage outlet and the tank; fix water pipes to the wall with clips, install a faucet, connect a pipe cap below it, and drill a hole to install a stainless steel basin as a handwashing basin; connect the water inlet pipe of the toilet tank, the shower hose, and install the toilet seat and a spray-type showerhead.
4. Door Fabrication: Fabricate a door using wooden boards and hinges, install a door handle, and ensure smooth opening and closing with good sealing.

Installation of Complete Finished Products Without Civil Engineering

This method focuses on modular design, decomposing the toilet into independent components such as columns, walls, and roof panels. During installation, fix the columns to the ground according to the instructions or drawings, and assemble and secure the wall and roof panel components using clips or bolts, ensuring tight connections at each point. This process does not require on-site cutting or welding, offering rapid deployment and the ability to be disassembled and reassembled, making it suitable for temporary events or emergency scenarios.

Conventional Construction Process

1. Material Selection: Select materials such as carbon steel, fiberglass reinforced plastic (FRP), plastic, or stainless steel based on the usage scenario to ensure corrosion resistance and structural strength.
2. Frame Fabrication: Precisely cut component dimensions according to the construction drawings and form a frame structure through welding or bolt connections; grind and apply anti-rust treatment to welded areas, and spray anti-corrosion paint on the surface.
3. Surface Fabrication: Fix the selected non-metallic material (such as fiberglass reinforced plastic) onto the frame, ensuring flatness and sealing; seal the joints to prevent leakage.
4. Equipment Installation: Install sanitary facilities such as toilets, water tanks, sewage pipes, and handwashing basins, connect the inlet and outlet pipes, and test for sealing; install electrical control systems (such as lighting and ventilation equipment) and conduct wiring debugging.
5. Overall Debugging: Integrate all components and conduct functional tests, including sewage discharge, water supply, and electrical systems, to ensure stable operation before delivery for use.