Mobile Toilet Bowl Installation

The installation steps for a mobile toilet bowl (mobile toilet) are as follows:

I. Basic Preparations
Upon receiving the package, open it immediately to check the completeness of the accessories. The accessory lists for the basic model and the elevated model (such as the 738 model) may differ. Verify all components according to the product manual, including the upper and lower buckets, silicone anti-slip pads, buckles, and elephant legs (exclusive to the elevated model). If any accessories are missing or damaged, contact the supplier immediately for replacements to avoid interruptions during installation.

II. Installation Steps for the Basic Model

1. Install Anti-slip Pads: Embed the silicone anti-slip pads into the recesses at the four corners of the bottom, ensuring the pads are flat and not翘起 (翘起 can be translated as 'lifting' or 'protruding', but here it means 'not flat', so we can use 'even'). The purpose of the anti-slip pads is to enhance stability and prevent the toilet from tipping over due to uneven ground or external forces during use.
2. Assemble Buckets: Align the interfaces of the upper and lower buckets, and press down evenly with both hands until the buckles make a 'click' sound, indicating they are securely fastened. After installation, gently shake the buckets to check for any looseness or unusual noises, ensuring structural stability.

III. Installation Steps for the Elevated Model (such as the 738 model)

1. Separate Components: Take out the elephant legs and anti-slip pads, and separate the two sets of elephant legs (4 in total) from the anti-slip pads (4 in total). The elephant legs are adjustable-height support structures, and the installation order should be adjusted according to user needs.
2. Install Support Legs: Place a single anti-slip pad onto the bottom of each elephant leg, ensuring the pad completely covers the contact surface. Install the four elephant legs one by one, keeping the spacing even to avoid tilting due to an off-center重心 (重心 can be translated as 'center of gravity').
3. Secure Buckets: Connect the assembled elephant legs to the upper and lower buckets, aligning the interfaces before pressing the buckles. Due to the complex structure of the elevated model, extra checks are needed to ensure the connections between the elephant legs and the buckets are tight to prevent loosening after long-term use.

IV. Post-installation Checks

1. Stability Test: Gently push the edge of the toilet to observe for any wobbling or displacement. If stability is insufficient, readjust the position of the anti-slip pads or tighten the buckles.
2. Function Test: Pour a small amount of water to test the flushing system (if equipped) and check for smooth drainage to avoid clogging risks.

Precautions: Avoid using excessive force during installation to prevent buckles or plastic parts from breaking; if the product comes with a manual, follow the manual's steps as the primary reference; this article serves only as a general guide.