Mobile Toilet Automatic Cleaning
There are mainly two ways to achieve automatic cleaning of mobile toilets:
Basic Flushing Type
An automatically cleaning mobile toilet adopts a relatively basic automatic flushing design. Its structure includes the toilet body, a small fan, an exhaust fan, etc. A fixed platform is firmly connected at the middle bottom of the toilet body, and a connecting seat is fixedly connected to the rear of the outer wall of the fixed platform. A flushing head is embedded inside the connecting seat. This flushing head has a dual function. On one hand, it can flush the stains inside the pit. After the user finishes using it, the flushing head is activated, and high-pressure water can wash away the excreta and other stains in the pit, keeping the pit clean. On the other hand, it can also flush the mud on the place where the user steps. In some outdoor places, the user's shoe soles may be stained with mud. After entering the toilet and stepping on the floor, the flushing head can promptly wash away this mud, preventing the floor from getting dirty and maintaining the cleanliness of the toilet's internal environment. This automatic cleaning method has a relatively simple structure and low cost. It is suitable for mobile toilet scenarios where the cleaning requirements are not extremely high and the usage frequency is relatively moderate.
Fully Automatic Comprehensive Cleaning Type
The fully automatic cleaning toilet invented abroad has more complex and comprehensive automatic cleaning functions. When people successfully swipe their cards to use the toilet, the door will open automatically, and the user can enter and use it. After the user finishes using it and walks out, the indoor cleaning function will be automatically activated. At this time, several high-pressure water cannons will spray water together to flush the floor, thoroughly washing away the stains and residues on the floor. Waste paper will fall into a special container to avoid clogging the drainage system. The water used for flushing the floor will eventually fall into the drainage system below due to the floor's permeable tiles, ensuring that the floor does not accumulate water. During the process of cleaning the floor, the toilet will rotate into the cleaning room, and at the same time, another clean toilet will come out of the cleaning room. The toilet entering the cleaning room will be covered by a transparent glass罩 (glass cover). Then, high-pressure water cannons will spray biodegradable detergent for a comprehensive cleaning. This detergent can effectively remove the dirt on the inner wall of the toilet and will not cause pollution to the environment. The high-pressure water cannons will flush the toilet from all angles without leaving any dead spots. After cleaning, it will be dried to ensure that the toilet is clean and dry and ready for the next user at any time. This fully automatic comprehensive cleaning type of mobile toilet has a better cleaning effect but has a complex structure and high cost. It is suitable for places with extremely high hygiene requirements and high usage frequencies, such as large-scale event venues and high-end scenic spots.
