Mobile Toilet Assembly Guide

The assembly guide for mobile toilets varies depending on the type. Here are the assembly steps for common types:

Ordinary Mobile Toilet Assembly Guide (Taking the Six-Step Installation Method as an Example)

1. Unpacking and Inspection: Upon receiving the package, immediately open it and carefully check the parts list to ensure that all components (such as the toilet body, water tank, connecting pipes, etc.) are complete and not missing.
2. Obtain Instructions: Refer to the product manual or contact customer service to confirm the installation steps and precautions. Some products may require pre-installation of batteries or connection of water pipes.
3. Body Installation: Place the toilet body on a stable ground surface and fix the base or bracket according to the instructions to ensure structural stability.
4. Water Tank Connection: If it is a split design, connect the water tank to the toilet body using a sealing gasket or threaded joint. Make sure to tighten it to prevent water leakage.
5. Function Testing: After assembly, inject a small amount of clean water to test the flushing function. Check whether the drainage is smooth and the sealing is good.
6. Fixing and Adjustment: Adjust the height or angle of the toilet according to usage needs to ensure comfort.

Elevated Model 738 Mobile Toilet Assembly Guide

1. Parts Confirmation: After unpacking, check the parts, including 4 "elephant legs" (support legs), 2 handrails, 4 anti-slip pads, and 1 soft-closing device.
2. Support Leg Installation: Fix the anti-slip pads to the bottom of the "elephant legs" respectively to ensure a flat contact surface. Distribute the 4 support legs evenly around the toilet and fix them with bolts or buckles.
3. Handrail Assembly: Install the handrails on both sides of the toilet according to the instructions. Adjust the height to a comfortable position and lock it.
4. Soft-Closing Device Installation: Connect the soft-closing device between the toilet lid and the body. Test whether the opening and closing are smooth and noise-free.
5. Overall Inspection: Confirm that all parts are firmly installed. Shake the toilet to test its stability. Adjust the position of the anti-slip pads to ensure anti-slip effect.

Prefabricated Mobile Toilet Assembly Guide

1. Preliminary Planning:
   • Demand Assessment: Clarify the usage scenario (such as scenic spots or construction sites), the number of people, the ratio of toilet stalls, and accessibility requirements.
   • Site Preparation: Choose a flat and solid ground surface. Reserve space for a septic tank or sewage storage tank and a clearance channel. Keep it away from drinking water sources.
   • Foundation Construction: For long-term use or when the ground conditions are poor, it is necessary to pour concrete foundation piers or lay a load-bearing platform.
2. Material Arrival:
   • Body Transportation: Use a forklift or crane to load and unload the box body to avoid collisions.
   • Parts Inventory: Check connecting bolts, sealing strips, drainage hoses, ventilation pipes, etc. Check whether the septic tank and clean water tank are intact.
3. Body Installation:
   • Box Body Placement: Use lifting equipment to place the box body steadily on the foundation. Adjust it to a horizontal state with a level.
   • Multiple Stalls in a Row: Connect adjacent box bodies according to the specifications to ensure sealing and structural stability.
4. Function Debugging: Connect the water supply pipe, drainage pipe, and electrical circuit. Test the flushing, ventilation, and lighting systems. Check the sealing of the septic tank.