Mobile Tile Toilet

Mobile tile toilets mainly come in two types: movable toilets made from discarded tiles and regular mobile toilets. Here is a detailed introduction:

Movable Toilets Made from Discarded Tiles

1. Making the Base: First, place the toilet on the tiles and use a ruler to draw a red marking line along the edge of the toilet. Then, move the toilet aside and use an angle grinder to cut along the marking line, creating a rectangular tile piece that is slightly larger than the bottom of the toilet.
2. Installing Casters: Flip the cut rectangular tile over and place casters at each of the four corners. Use a marker to draw marking points along the screw holes of the casters, and then use an electric drill to drill corresponding screw holes at these points. Align the casters with the screw holes again, insert the bolts through the holes, and secure them with nuts. After that, use the angle grinder to cut off the protruding bolts on the back of the tile to avoid affecting subsequent use.
3. Connecting the Sewage Pipe: Place the toilet back on the tile, draw marking lines along the edge of the toilet, and also mark the position of the sewage outlet at the bottom of the toilet that connects to the sewer. Insert a hose from the bottom of the tile and secure it.
4. Securing the Toilet: Apply a circle of white cement along the marking lines on the tile and place the toilet on the tile according to the marking lines, ensuring that the toilet and the tile are firmly bonded together with the cement.
5. Completing the Installation: Move the toilet with the installed base to the bathroom, install components such as the water tank and toilet seat, put the sewage hose into the drain pipe, and connect the water inlet pipe to the water tank. A highly creative movable toilet is now complete. However, there may be leakage from the sewage pipe of this type of toilet, so extra caution is needed during use to prevent wetting the floor.

Regular Mobile Toilets

Some mobile toilets have non-slip tiles on their internal floors. For example, there is a mobile toilet that is 10 meters long, 3 meters wide, and 2.8 meters high. Its main body is welded from high-quality galvanized square tubes and galvanized steel plates, and its surface is treated with high-temperature spraying, which not only gives it anti-corrosion and anti-rust properties but also makes its appearance particularly smooth and beautiful. The internal floor is paved with non-slip tiles, which can effectively increase friction and prevent people from slipping. The walls are made of bamboo-wood fiber boards, which are environmentally friendly and aesthetically pleasing, providing a comfortable using environment for users.