How to Install a Mobile Dog Cage Toilet
The installation of a mobile dog cage toilet should be carried out according to the specific model. Taking the A42 storage toilet integrated dog cage as an example, the installation steps are as follows:
1. Door Panel Assembly
The door panel is the entrance part of the dog cage toilet and should be installed first. First, use the provided screwdriver to install the white fasteners into the door panel slots, making sure to align the protrusions with the slots and press firmly to ensure the fasteners are securely fixed. Next, align the transparent panel with the door panel through the holes and fix it with screws to prevent loosening during subsequent use. Pay special attention to the direction when installing the door handle and door hinge, adjusting the tooth positions to align before fixing to prevent the door panel from being difficult to open or close or being damaged.
2. Cage Body Assembly
The cage body is the main structure of the dog cage toilet and should be assembled in order. First, use rectangular white film sheets, fasteners (small/medium/large), and strike plates, following the order of 'short strike plates at the back, long strike plates on the sides/middle', align the iron wires with the slots and tighten them to ensure the cage body frame is stable. Next, when installing the load-bearing plate, align the iron wires with the slots and press firmly to avoid structural instability due to a loose load-bearing plate, which could affect safety during use.
3. Toilet Separation Section
The toilet separation section is the core functional area of the dog cage toilet and needs to be precisely connected to the cage body. First, align the配套 (matching) wire-free iron frame drawer with the slots at the bottom of the cage body, slowly push it in and fix it to ensure the drawer can be smoothly pulled out and in without gaps. Next, assemble the storage layers in layers using square/rectangular moldings, forming an independent space from the toilet area to prevent storage items from mixing with pet waste and maintain cleanliness and hygiene.
Precautions:
- For other models (such as A139), the toilet installation steps are not detailed, and the installation processes for folding dog cages and square-tube dog cages do not involve the toilet part. It is recommended to refer to the complete installation video of the A42 model first to ensure accurate operation.
- During the installation process, check whether each component is aligned and firmly fixed to avoid pet injuries or cage damage due to improper installation.
- If problems such as mismatched slots or loose screws occur during installation, adjust or replace the components in a timely manner and do not force assembly.
