Mobile Container House Construction
Mobile container house construction primarily involves aspects such as structural selection, installation process, and technical key points.

Structural Selection: There are two common types of mobile container house structures on the market: welded integral boxes and bolt-connected assembled boxes. Welded integral boxes are formed by integral welding in the factory, with a direct load path. The roof load is transferred through the side wall columns to the bottom beams and then evenly distributed to the ground through the bottom beams. They have strong resistance to deformation and are suitable for scenarios requiring frequent lifting and moving. Bolt-connected assembled boxes use standard plates connected by bolts, with multiple connection nodes in the load path. The tightness of each node directly affects the overall stability. When purchasing, it is necessary to check the steel wall thickness of the columns and bottom beams. Common specifications range from 1.5 mm to 3 mm. The thicker the wall thickness, the greater the load-bearing redundancy, but the self-weight also increases accordingly.
Installation Process: Installing a mobile container house involves multiple technical steps. First, ground engineering treatment is required to ensure that the ground is flat and solid enough to bear the weight of the house. Next, the house is lifted and positioned accurately at the predetermined location. Then, connection and fixation are carried out. For bolt-connected assembled boxes, it is essential to ensure that each bolt connection node is tightly and reliably fixed; for welded integral boxes, the quality of the welded parts should be inspected. Finally, waterproofing treatment is performed, including at the connections between the roof, walls, and ground, to prevent rainwater leakage.
Technical Key Points: During construction, full consideration should be given to the load transfer path to ensure the stability of the house structure. At the same time, attention should be paid to installation efficiency. For example, the fast-assembled boxes from Zhongnan in Suzhou adopt a modular design, with a single module installation taking only 4 hours. No complex welding procedures are required on-site, and assembly can be completed simply by bolt connection. In addition, some container houses have completed interior decoration in advance before leaving the factory, including lighting, sockets, and basic furniture, and can be put into use immediately after on-site lifting, saving the time cost of secondary decoration.




