Making Mobile Toilet Images

Currently, there are no directly available images for making mobile toilets, but descriptions of production cases can be provided for reference.

Making a Mobile Toilet Using a Water Storage Tank

• Material Preparation: You will need a water storage tank, wooden boards, universal wheels, wooden strips, sponge strips, plastic soft boards, and other materials. The water storage tank serves as the main structure and should be of good quality and undamaged. The wooden boards are used to support and fix the universal wheels. The universal wheels facilitate the movement of the entire toilet. The wooden strips are used to increase the height on the upper side of the tank. The sponge strips and plastic soft boards are used to construct the door frame and walls.
• Production Steps: First, split the water storage tank in half lengthwise. Fix the universal wheels at the four corners of the wooden board to enable easy movement of the entire structure. Then, fix the wooden strips on the upper side of the tank to increase the height to meet usage requirements. Cut an opening on the side of the water storage tank for the door, install the sponge strips to form the door frame, and insert the plastic soft boards to create the walls, providing some privacy and shelter. Place the upper half of the water storage tank as the roof to protect against rain. Finally, install indoor fixtures such as a floor drain for easy drainage, a bath heater to provide a warm environment, and a toilet to meet excretion needs.

Creating a Mobile Toilet Using Discarded Tiles

• Material Preparation: Discarded tiles, a toilet, an angle grinder, universal wheels, hoses, cement, a water tank, a toilet seat cover, etc. The discarded tiles serve as the base material for supporting the toilet. The angle grinder is used to cut the tiles. The universal wheels enable the mobility of the toilet. The hoses are used to connect the sewage outlet and the water inlet pipe. The cement is used to fix the toilet. The water tank and the toilet seat cover are standard accessories for the toilet.
• Production Steps: First, place the toilet on the tiles and draw marking lines. Use the angle grinder to cut out rectangular tile pieces. Install the universal wheels at the four corners of the tile pieces and cut off the protruding bolts on the back to prevent interference with installation and use. Place the toilet back on the tiles and draw marking lines and the position of the sewage outlet. Insert the hoses, apply cement to attach the toilet, and ensure it is firmly fixed. Install accessories such as the water tank and the toilet seat cover. Finally, connect the sewage hose and the water inlet pipe to enable normal use of the toilet.