Making Mobile Home Toilet

You can refer to the following two methods for making a mobile home toilet:

Method 1: Making a Mobile Toilet Using a Water Storage Barrel

1. Main Structure Construction: Take out a water storage barrel from home and use an angle grinder to split it in half lengthwise. Prepare a wooden board and fix universal wheels at its four corners for easy mobility. Take several wooden strips and fix them to the upper side of the barrel with self-tapping screws to increase the height and provide space for installing other components later.
2. Door and Wall Construction: Use the angle grinder to cut an opening on the side of the water storage barrel for the door. Install sponge strips on both sides of the opening to form a door frame. Insert plastic soft boards between the wooden strips to create raised walls. Place the upper half of the water storage barrel on top of the wooden strips as the roof. To enhance aesthetics, paint the wooden strips with white waterproof paint.
3. Simple Door Making: Use foam strips to拼接 (assemble) discarded honeycomb wooden boards to make a simple door.
4. Drainage System Installation: Cut a hole at the bottom of the barrel and install a drainage pipe to form a floor drain. Cut holes on the side and bottom of a plastic barrel and install direct connectors. Place the plastic barrel on the roof as a small water storage device.
5. Bathroom Facility Installation: Connect the water pipes to make a bath heater and install a three-way connector below the water inlet pipe to connect a showerhead.
6. Toilet Installation: Place the toilet on the drainage pipe opening, install the water tank and fix it with glass glue, and connect the drainage pipe to the sewage barrel.
7. Sink Setup: Connect a water pipe horizontally to the three-way connector of the water outlet pipe and extend it to the door as the water inlet pipe for the sink. Cut a hole in the door and install a connector.

Method 2: Making a Solar-Powered Mobile Toilet Using a Water Storage Barrel

Although the detailed production process is not described, it can be inferred that the basic idea is to add solar-related equipment to the above-mentioned mobile toilet. For example, install solar panels on the roof to power the bath heater, lighting, and other equipment, achieving self-sufficiency in energy and being more environmentally friendly and energy-efficient. However, when making it, factors such as the specifications of the solar panels, the installation angle, and the connection method with the electrical equipment need to be considered to ensure the stable operation of the solar system.