Lu Jian Container House Design Drawing
No direct information on the 'Lu Jian Container House Design Drawing' has been found yet, but there is a container panel house design reference available. Here are the detailed design aspects of that container panel house:
Container Body Structure Dimensions and Materials
The overall dimensions of the container body are 9000mm (length) × 2500mm (width) × 2600mm (height), with a high-strength steel frame. The bottom sill uses 16# channel steel, and the bottom crossbeams combine 16# and 14# channel steel to ensure bottom load-bearing stability. The top sill adopts 80×100/140/160 square tubes to accommodate different top load requirements. The floor is made of 4mm thick checkered steel plate to enhance anti-slip properties; the side panels are 1.5mm corrugated plates, balancing strength and lightweight design; the roof uses 1.5mm stamped roof panels to optimize drainage structure. The columns are made of 120×120 square tubes, forming a vertical support framework to enhance overall wind and earthquake resistance.
Thermal Insulation Design
The roof employs a double-layer thermal insulation structure: a 50mm polyurethane foam layer provides basic thermal insulation, covered with a 50mm silicon rock purification board to enhance fire resistance. The side insulation layer consists of 30mm polyurethane foam + 50mm silicon rock purification board, balancing thermal insulation and cost. The bottom insulation layer is composed of a 100mm silicon rock board and a 1.5mm sealing plate to prevent cold bridge effects. This layered design effectively maintains stable indoor temperatures, suitable for use in different climatic regions.
Electrical System Configuration
The electrical circuit adopts a concealed installation design to enhance safety and aesthetics. The lighting system is equipped with two 300×1200mm, 48W LED flat panel lights to meet basic lighting needs; the switch system includes one single-pole switch for convenient control; two quick-insert 3-core 60A sockets support the use of high-power equipment. The distribution box integrates one 2P60A, one 2P16A, and one 2P10A circuit breaker each to achieve hierarchical circuit protection; one grounding bar ensures electrical safety. All electrical components comply with national standards, ensuring long-term stable operation.
Other Key Components
The container locks and hinges are single-procurement parts, with the exterior coated with GY04 coating, 150μm thick, offering excellent corrosion resistance; the interior is painted in RAL7035 color, suitable for industrial environments. The design drawing file size is 4.13MB, drawn on the AutoCAD2007 platform in dwg format, facilitating secondary modifications and construction guidance by professionals.
