Longnan Container House Installation

The installation of container houses in Longnan requires comprehensive consideration of multiple factors such as design, construction, foundation treatment, and compliance. The specific key points are as follows:

I. Planning and Design Before Installation

1. Matching Functional Requirements
   Determine the specifications, layout, and supporting facilities of the container house based on the usage scenario (such as temporary housing on construction sites, scenic area sales offices, industrial plants, etc.). For example, construction site dormitories need to consider ventilation, lighting, and personnel density, while scenic area sales offices should focus on aesthetic appearance and spatial flexibility.
2. Modular Combination Design
   Container houses support standardized modular combinations and can achieve buildings of different sizes through splicing (ranging from small kiosks to multi-story buildings). During the design process, it is necessary to reserve interfaces for doors, windows, electrical circuits, and plumbing to facilitate rapid installation in the later stage.
3. Compliance Review
   Before installation, an application must be submitted to the local urban management department to ensure that the site is legal and complies with planning requirements. Unauthorized placement without approval may face the risk of demolition.

II. Key Construction Points and Processes

1. Foundation Treatment
   • Flatness Requirements: The foundation needs to be compacted and leveled to avoid later tilting or water accumulation. For long-term outdoor use scenarios, it is recommended to construct concrete piers or steel frame reinforcement to enhance wind and earthquake resistance.
   • Drainage System: Pre-bury drainage pipes, and the slope design should meet drainage requirements to prevent rainwater backflow.
2. Lifting and Fixing
   • Select appropriate lifting points to avoid structural deformation. For long-term outdoor use scenarios, steel frames should be used to reinforce the corners, and the bottom should be fixed to the foundation through bolts or welding.
   • Example: A mobile kiosk (upgraded version of a container house) provided by a Guangzhou manufacturer significantly enhances durability through bottom concrete piers and anti-corrosion wood exterior wall treatment.
3. Internal Installation
   • Factory-prefabricated components (such as walls, partitions, and stairs) are assembled on-site, reducing noise and dust pollution.
   • Supporting facilities (such as air conditioners, electrical circuits, and plumbing) need to have interfaces reserved in advance, and water and electricity tests should be conducted after installation.

III. Post-Installation Inspection and Maintenance

1. Structural Stability Inspection
   Focus on inspecting connection nodes, foundation fixing, and wind and earthquake resistance design (such as steel frame reinforcement and concrete piers).
2. Waterproof and Moisture-Proof Treatment
   Container houses adopt structural waterproof design, but it is necessary to regularly check the aging condition of sealing strips and replace them in a timely manner to prevent leakage.
3. Long-Term Use Maintenance
   • Regularly clean the exterior walls and check whether the anti-corrosion coating has peeled off.
   • Internal facilities (such as electrical circuits and plumbing) should be used in accordance with regulations to avoid overloading.

IV. Cost and Efficiency Advantages

1. Rapid Installation
   A professional team can complete the installation within half a day (for example, two people can install a mobile kiosk in half a day), without the need for large-scale machinery, saving labor costs.
2. Cost Control
   The daily rental can be as low as 6 yuan per 18 square meters, and the rental for supporting air conditioners is 4 yuan per day. The average annual cost of long-term use is significantly lower than that of traditional buildings.
3. Reusability
   Container houses can be disassembled and relocated to a new site for reassembly, with low loss rates, making them suitable for temporary or periodic projects.