Dimensions of Lishui Intelligent Mobile Toilets

The dimensions of intelligent mobile toilets in Lishui vary depending on their type, function, and usage scenario. Common specifications are as follows:

I. Common Dimensions Classified by User Capacity

1. Standard Single-User Units:

   • Basic dimensions: Approximately 1.2 meters (width) × 0.8 meters (length) × 2.2 meters (height), suitable for temporary events or small spaces, equipped with basic flushing and deodorization systems.
   • Regular dimensions: Approximately 1.5 meters (width) × 1.2 meters (length) × 2.3 meters (height), with reserved space for movement, adaptable for wheelchair assistance.
   • Compact type: Some products measure 1.2 meters (width) × 1.2 meters (length) × 2.2 meters (height), suitable for locations with low foot traffic.

2. Double-User Units:

   • Regular dimensions: Approximately 1.5 meters (width) × 1.2 meters (length) × 2.2 meters (height), suitable for music festivals, exhibitions, etc., with more spacious interiors.
   • Dual-toilet type: Approximately 2.5 meters (width) × 1.5 meters (length) × 2.3 meters (height), including dual compartments and a shared sink, improving usage efficiency.
   • Independent compartment type: Approximately 2.4 meters (width) × 1.2 meters (length) × 2.2 meters (height), with independent compartments inside, suitable for high-traffic scenarios.

3. Multi-User Units:

   • Suitable for parks, sports venues, etc., common dimensions are 3.6 meters (width) × 1.2 meters (length) × 2.2 meters (height) or larger, with some products supporting customization.

II. Special Dimensions for Functional Mobile Toilets

1. Barrier-Free Models:

   • Basic requirements: Dimensions of at least 2.0 meters (width) × 1.5 meters (length) × 2.4 meters (height), with reserved space for wheelchair turning (≥1.5 meters × 1.5 meters).
   • Supporting facilities: Handrail height of 0.85-0.9 meters, non-slip flooring, entrance ramp slope ≤1:12, commonly used in public areas such as scenic spots and parks.

2. Maternity and Infant Facilities Models:

   • Additional space is required for baby changing tables, diaper changing stations, etc., with dimensions typically larger than standard models, adjusted according to functional configurations.

III. Other Common Specifications

1. Prefabricated Public Toilets: Standard dimensions of 12.0 meters (length) × 7.5 meters (width), including men's and women's restrooms and a management room, suitable for public facilities.
2. Compact Type: Using lightweight steel frames or fiberglass materials, dimensions can be reduced to 6 meters (length) × 2 meters (width), suitable for temporary or mobile scenarios.
3. Custom Models: Support personalized needs, such as 1.6 meters × 1.6 meters single-squat units or 3.2 meters × 1.6 meters double-squat units, flexibly adapting to special scenarios.

IV. Core Principles for Dimension Selection

1. Scenario Adaptability: Prioritize single-user or compact units for temporary events; double-user or multi-user units for high-traffic scenarios; consider barrier-free design for public areas.
2. Functional Completeness: Reserve additional space for special functions such as barrier-free and maternity facilities to ensure usability.
3. Material and Structure: Lightweight steel frames or fiberglass materials can reduce dimensions but require a balance between stability and durability.