Installation Steps for Mobile Toilets in Linzhi

The installation steps for mobile toilets in Linzhi can refer to the general installation process for mobile toilets, with the core steps being 'positioning - assembly - connection'. Details are as follows:

I. Positioning

The installation location needs to be determined based on site planning and ground conditions. Key requirements include:

1. Ground firmness: The terrain in the Linzhi area is complex. It is necessary to ensure that the installation ground is a hardened surface (such as concrete) or a soil layer that has been compacted to prevent toilet tilting or damage due to foundation settlement.
2. Drainage conditions: For flush toilets, they need to be close to drainage pipes or have a reserved septic tank location. For non-flush toilets, a fecal collection area needs to be planned to ensure compliance with environmental protection requirements.
3. Spatial layout: Reserve sufficient operating space (e.g., aisles with a width of at least 1 meter) to avoid conflicts with surrounding buildings, trees, and other obstacles.

II. Assembly

Choose the assembly method according to the type of toilet:

1. Split-type mobile toilets:

   • Chassis and frame installation: Use a forklift or crane to place the prefabricated steel structure chassis steadily at the positioning point. Adjust it to a level state using a level gauge and fix the anchor bolts.
   • Wall and roof panel installation: Insert the sandwich panel wall panels into the chassis slots one by one and fasten them with bolts or clips. When installing the roof panel, perform waterproof sealing treatment (such as applying silicone sealant) to prevent leakage due to the rainy weather in Linzhi.
   • Time required: Wall installation usually takes 1 - 2 hours and requires the collaboration of 2 - 3 people.

2. Integrated mobile toilets (box-type toilets):

   • Hoisting into place: The factory has completed the interior decoration and equipment integration. At the site, simply use a crane to hoist the entire unit to the positioning point, adjust it to a level state, and then fix it.
   • Advantages: The installation time can be shortened to 2 - 4 hours, which is suitable for the rapid deployment needs in the Linzhi area.

III. Connection

1. Equipment installation:

   • Install internal partitions, toilets, flushing systems (for flush toilets) or fecal storage tanks (for non-flush toilets), hand-washing basins (optional), lighting, and ventilation equipment.
   • Water and electricity connection: Operated by professionals, use modular quick connectors to connect water pipes and electrical circuits to shorten the installation time. For solar power systems, ensure that the solar panels face the correct direction (it is recommended to tilt them 30° - 45° southward in the Linzhi area).

2. Function testing:

   • Flush testing: Check the water pressure and drainage for smoothness to avoid blockages.
   • Electrical circuit check: Ensure that the lighting and ventilation equipment operate normally and there is no risk of electric leakage.
   • Sealing check: Focus on checking the joints between wall panels and the connections between the roof and walls to prevent rainwater infiltration.

Note: The climate in the Linzhi area is humid with large temperature differences between day and night. During installation, strengthen waterproof and moisture-proof treatment and regularly check the stability of the equipment to extend its service life.