Lines on Container House

The lines on container houses may involve structural load-bearing lines, water and electricity pipelines, or external marking lines, and the specific type needs to be determined based on the container type and usage scenario.

Lines Related to Structural Load-Bearing Paths

The structural type of a container house directly affects its load-bearing path. For welded integral containers, the load-bearing path is direct: the roof load is transferred through the side wall columns to the bottom sill, and then evenly distributed to the ground via the bottom sill. In such structures, there may be auxiliary lines indicating the load-bearing direction, used to confirm structural stability during installation or maintenance. For bolt-connected assembled containers, the load-bearing path has multiple connection nodes. The bolt layout at these nodes may be marked in the form of lines to ensure that the tightness of each node meets the standards and prevent a decrease in overall stability due to loose nodes.

Lines Related to Water and Electricity Pipeline Layouts

Container houses usually have pre-buried water and electricity pipelines inside. These pipelines may exist in exposed or concealed forms. Exposed pipelines (such as wires and cables) need to be equipped with protective sleeves and arranged along the edges of walls or roofs, forming visible lines. Concealed pipelines may have reserved slots inside walls or roof panels. During installation, the pipeline routes need to be marked according to the design drawings, forming implicit 'lines'. In addition, devices such as sockets and switch boxes need to be installed in metal galvanized boxes in an exposed manner, and their positions and connection lines may also be planned in the form of lines.

Lines Related to External Markings and Safety Warnings

There may be marking lines or warning lines on the exterior of container houses. For example, the edges of fire exits and main aisles may be marked with solid yellow lines to indicate 'caution' and 'boundaries'. Hazardous material storage areas may be marked with solid red lines to indicate 'no blocking' or 'danger'. Anti-collision warnings on columns and the edges of steps may be marked with yellow and black alternating lines to remind people to 'be careful of collisions'. The width and color of these lines need to comply with warehouse marking standards (e.g., 120mm for main aisles and 60 - 80mm for auxiliary aisles) to ensure clear and standardized markings.