Lincang Container House Installation

The installation of container houses in Lincang should follow the following steps and precautions:

I. Preliminary Preparations

1. Site Survey and Planning:

   • Ensure the site is level, with preference given to hardened ground (such as concrete floors or crushed stone sub-bases) to prevent long-term settlement of the container. In mountainous areas of Lincang, the foundation should be treated in advance, with concrete foundations poured or legs used for fixation as necessary to adapt to complex terrain.
   • Given the long rainy season in Lincang, a drainage system should be planned to prevent water accumulation from eroding the foundation.

2. Material and Tool Preparation:

   • Prepare in advance the main container body, doors and windows, water and electricity fittings, lifting equipment (forklifts or cranes), and fixing screws.
   • In response to the rainy climate in Lincang, prepare waterproof cloth to cover materials and prevent moisture damage during transportation or installation.

II. Standard Installation Process

1. Container Positioning and Lifting:

   • Use professional equipment to lift the container smoothly and place it precisely at the predetermined location.
   • In the foggy mountainous areas of Lincang, ensure that the wind speed is below the safety limit (generally ≤ Level 6) during lifting to prevent overturning caused by strong winds.

2. Fixation and Level Adjustment:

   • Use a level to calibrate the flatness of the container and fix it with bottom bolts or legs. If multiple containers are joined together, reserve expansion joints (about 2-3 cm) to accommodate deformation caused by temperature differences.

3. Interior Decoration and Functional Completion:

   • Plan the water and electricity pipelines in advance. In areas of Lincang with high humidity, it is recommended to apply moisture-proof treatment to the pipelines (such as wrapping them with waterproof tape).
   • After installing doors and windows, check their sealing performance and fill gaps with waterproof glue to prevent rainwater leakage.

III. Measures to Address Lincang's Special Climate

1. Moisture and Termite Prevention:

   • Paint the inner walls of the container with anti-mold paint and lay a moisture-proof membrane (such as polyethylene film) at the bottom to reduce moisture penetration.
   • For houses in mountainous areas, regularly check for termite infestation and spray insect repellent or set up isolation layers around the foundation if necessary.

2. Earthquake and Wind Resistance Design:

   • In areas of Lincang prone to earthquakes, strengthen the connection between the container and the foundation during installation (such as using expansion bolts or welding for reinforcement).
   • For wind resistance, reinforce the structure according to local wind pressure standards (such as ≥0.5 kN/㎡), for example, by adding diagonal braces or anchor points.

IV. Precautions and Cost Reference

1. Compliance Check:

   • Before installation, confirm with the local housing and construction department whether the house complies with temporary building regulations to avoid demolition due to illegal construction.

2. Cost Reference:

   • The installation cost of a basic container house is approximately 150-300 yuan/㎡ (including transportation, lifting, and foundation). In remote areas of Lincang, costs may increase by 10%-20% due to higher logistics costs.