Dimensions of Mobile Toilets in Lijiang
The specific dimensions of mobile toilets in Lijiang are not explicitly mentioned in publicly available information, but the specifications of common mobile toilets can be referred to in the following categories. The actual dimensions need to be confirmed by contacting the supplier.
The size design of mobile toilets is usually configured differently according to the usage scenario, pedestrian traffic, and functional requirements. The common types and specifications are as follows:
1. Single-person Standard Type
This type of toilet is suitable for places with limited space or low pedestrian traffic, such as scenic trail paths and temporary event sites. Its standard size range is: length 1.1 - 1.5 meters, width 0.8 - 1.1 meters, and height 2.2 - 2.4 meters. The interior space is compact and usually equipped with basic sanitary facilities (such as a toilet or squat pan, and a sink). Some models may adopt a folding door design to save space.
2. Double-person Standard Type
Suitable for areas with slightly higher pedestrian traffic, such as park entrances and commercial streets. The size range is: length 1.8 - 2.5 meters, width 1.0 - 1.2 meters, and height 2.2 - 2.4 meters. The interior can be divided into two independent toilet compartments or set up with one toilet compartment and one management room (for storing cleaning tools or equipment), providing a more flexible functional layout.
3. Barrier-free Type
Designed to meet the needs of special groups such as the disabled and the elderly, and must comply with barrier-free access standards. The size range is: length 1.8 - 2.4 meters, width 1.2 - 1.8 meters, and height 2.2 - 2.4 meters. The interior needs to reserve a wheelchair turning space (with a diameter of not less than 1.5 meters) and be equipped with auxiliary facilities such as handrails and low-position sinks. The door width is usually not less than 0.9 meters to facilitate wheelchair access.
4. Small Portable Folding Type
Suitable for temporary events, emergency rescue, and other scenarios, emphasizing portability and rapid deployment. After folding, the size can be reduced to 1 meter × 1 meter × 2 meters. Although the interior space is limited after unfolding, it can meet basic usage requirements. These toilets are mostly made of lightweight materials (such as aluminum alloy and high-strength plastic), which are relatively light in weight and easy to carry manually or transport by vehicle.
Note: The actual dimensions of mobile toilets in the Lijiang area may be adjusted due to factors such as the supplier, customization requirements, or terrain limitations. For example, suppliers such as Kunming Gelarui Si Traffic Engineering Co., Ltd. can provide personalized design services, and users need to contact them directly to obtain precise parameters and quotations. In addition, when choosing the size of a mobile toilet, comprehensive consideration should also be given to transportation conditions (such as road width and turning radius), installation site (such as ground flatness and drainage system), and other factors to ensure safety and convenience of use.
