Lehe Brothers Portable Toilet Usage

Although there is no direct and detailed description of the 'Lehe Brothers Portable Toilet', you can refer to the general usage methods of independent portable toilets as follows:

Installation and Connection

• Placement and Fixation: Place the portable toilet on a stable surface and push open the bottom wheel locks to secure it, ensuring it does not move during use.
• Sewage Connection: Connect one end of the配套 (matching) sewage hose to the toilet's sewage outlet and the other end to a floor drain or temporary sewage bucket. Ensure the connections are tight to prevent sewage leakage due to looseness.
• Water Inlet Connection: Connect the water inlet hose to a clean water source and open the valve to fill with water. At the same time, plug in the power cord to ensure a stable power supply for subsequent functions such as flushing and heating.
• Seal Check: Check all connections for tightness and no leakage, especially ensuring that the sewage pipe is fully inserted into the drain to prevent odor from escaping and affecting the user experience.

Function Operation

• System Startup: Press the power switch on the control panel to start the system. The indicator light will turn on, indicating that it is in standby mode.
• Flushing Operation: After using the toilet, press the flush button (usually marked with a water droplet icon). The built-in water pump will draw water from the clean water tank into the toilet bowl for flushing. Some models are equipped with a dual-flush function, allowing you to choose a small amount of water for urination and a large amount for defecation according to actual needs, saving water while ensuring cleanliness.
• Heating Adjustment: Models with heated seats allow you to adjust the seat temperature according to personal needs, providing greater comfort in winter.
• Deodorization Function: The deodorization function generally operates automatically and can also be manually activated with a button to effectively remove odors from the toilet.

Maintenance and Cleaning

• Sewage Tank Handling: When the sewage tank is almost full (usually indicated by a full-level alarm), turn off the power first and then pull out the sewage pipe. Hold the handle of the sewage tank and pull it out horizontally to avoid leakage due to tilting. Pour the sewage into a toilet or designated sewage disposal point and rinse the inside of the tank with clean water. Monthly disinfection with a special cleaner is required, paying special attention to cleaning fiber residues around the shredding blades.
• Clean Water Tank Maintenance: It is recommended to clean the clean water tank once a week to prevent algae growth that could block the water pipes.
• Usage Prohibitions: When using the portable toilet, avoid throwing in any debris other than toilet paper. Feminine hygiene products and diapers can easily cause blockages.
• Freeze Protection: In cold environments, pay attention to freeze protection. Water temperatures below 0°C may damage the water pump.
• Long-term Storage: Before long-term storage, empty all water tanks and keep the lids open for ventilation and drying.
• Troubleshooting: If flushing fails, first check the water level in the clean water tank and the power connection, and then check if the sewage pipe is bent or blocked.