Kaifeng Intelligent Mobile Toilet Installation

The installation of intelligent mobile toilets in Kaifeng should follow the following procedures and specifications:

I. Pre-installation Preparation

1. Site Planning: Confirm that the installation location avoids low-lying areas, high-voltage lines, and obstacles. The ground should be hardened and covered with anti-slip tiles. Measure the site dimensions to ensure a passage width of at least 1.2 meters and reserve operational space. Confirm the availability of water and electricity connections and a septic tank (required for construction sites).
2. Material Inspection: Verify the toilet model, accessories (such as sinks, sewage pipes, etc.), and the pit distance of the intelligent toilet (305mm/400mm). Check the water and electricity reservations (sockets should be within 30cm of the sewage outlet and at a height of 30cm), and the base surface sealing method (silicone sealant or flange ring, cement is prohibited).
3. Tools and Personnel: Equip with tools such as wrenches and spirit levels, and arrange 2-3 professional personnel. Use a crane if necessary. The intelligent toilet should be installed after the wall and floor tiles have completely dried.

II. On-site Installation Steps

1. Foundation Fixing: Lift the toilet body and adjust it to be level using a spirit level (deviation ≤ 3mm). Secure it with expansion bolts or counterweights. For the intelligent toilet, locate the centerline of the sewage outlet and maintain a 2-5mm gap between the back wall and the wall.
2. Water and Electricity Connection: Ensure the sewage pipe has a slope of at least 2% and connect it to the sewer or collection tank. Use a water pipe with a diameter of at least DN20 for the water source. Test the flushing and drainage sealability. Connect the intelligent toilet's water inlet pipe to the angle valve and check for leaks.
3. Detail Handling: Install curtains and anti-slip mats, check the flexibility of door locks and buttons, clean and disinfect the interior, and place consumables. For the intelligent toilet, confirm the seal of the flange ring and the tightness of the bottom bolts.

III. Acceptance and Delivery

1. Function Testing: Flush continuously three times to confirm smooth drainage, step on the top to test structural stability. For the intelligent toilet, check functions such as the nozzle and filter.
2. Document Handover: Provide an 'Equipment Installation Acceptance Form' indicating the installation date, warranty period, and usage instructions.

IV. Safety and Special Requirements

1. Safety Specifications: Wear safety harnesses for high-altitude work. Installation is prohibited in windy weather (≥5 levels). Keep away from fire sources and prohibit smoking. For the intelligent toilet, close the water inlet angle valve before installation and drain the sewage from the pipes.
2. Requirements for the Kaifeng Area: Prioritize eco-friendly toilets in scenic spots. Report in advance for installations in the Yellow River beach area. Temporary facilities require a road occupation permit and should be equipped with warning signs.

V. Purchase and Leasing Recommendations

• For leasing, sign the contract 7-10 days in advance to reserve debugging time.
• For purchase, contact Fengzhishang Intelligent Equipment (Yuwangtai District Branch, Kaifeng City, Manager Yu at 13383835676) or Kaifeng Qingzhigu Environmental Protection Technology Co., Ltd. (Manager Liang at 4001005800).