Kaifeng Conventional Mobile Toilet

The basic specifications, functional configurations, and service standards of conventional mobile toilets in Kaifeng are as follows:

I. Basic Specifications

The dimensions of conventional mobile toilets vary by type: single/double-stall models typically measure approximately 1.2×2.5×2.3 meters in length, width, and height, while custom-made models can exceed 3×4 meters. The outer frame of a single mobile toilet commonly measures 1.2m×1.5m×2.2m, accommodating a single user. The main body is constructed from high-strength fiberglass or stainless steel, with a compressive strength of at least 1500kg. The shell is waterproof and sun-resistant, with a service life of 8-10 years. The toilet stall includes a toilet seat, sink (some with sensor faucets), lighting, and ventilation systems, with high-end models also featuring air fresheners and emergency call devices.

II. Functional Configuration Requirements

1. Flushing and Sewage Disposal: The flushing system is available in manual (press-button flush valve) and automatic (sensor-based) options. The sewage disposal design includes an independent sewage tank and drainage outlet, with some models incorporating activated carbon filtration or U-shaped water seals for odor control.
2. Internal Facilities: Depending on demand, users can choose between squat or sit toilets, equipped with storage shelves, hooks, LED lighting, exhaust fans, non-slip floor tiles, and toilet paper holders. External signage and handrails are also provided.
3. Water and Electricity Supply: Standard models come with a 200L water tank and sewage tank. Temporary models for construction sites often utilize solar power and rainwater collection systems, while some require connection to municipal water and electricity supplies.

III. Additional Practical Configurations

1. Privacy and Safety: Lockable doors are standard, with some models featuring additional curtains or partition designs. Winter models are equipped with insulation or heating devices to prevent water tank freezing.
2. Cleaning and Signage: External signage indicates “Men,” “Women,” or “Accessible” facilities, while internal provisions include toilet paper and hand sanitizer.

IV. Rental Service Standards

1. Delivery Standards: The lessor must provide product factory certification and hygiene inspection reports, ensuring compliance with municipal environmental protection requirements. The use of unlicensed products is prohibited.
2. Installation and Maintenance: Free installation and debugging are provided during the rental period. Daily cleaning is conducted once every 24 hours, with increased frequency during peak times. Fault response time is ≤2 hours.
3. Safety Measures: Fire extinguishers and non-slip mats are provided, with anti-settlement treatment applied to load-bearing areas to prevent equipment tilting.