Jiyuan Mobile Toilet Dimensions

The dimensions of mobile toilets in Jiyuan vary depending on the model and type, with common specifications as follows:

Taking model ht-055 as an example, its dimensions are 1200×1500×3000 millimeters (length 1.2 meters, width 1.5 meters, height 3 meters). This size belongs to customized or special-function products, which may include independent squatting positions, storage space, or barrier-free facilities. The height is significantly higher than that of conventional mobile toilets to meet specific usage requirements.

Dimensions of conventional mobile toilet types:

1. Single-person standard type: Length 1.2-1.5 meters, width 0.8-1.0 meters, height 2.2-2.4 meters. The minimum dimensions of the basic single-person model are approximately length 1.2 meters, width 1 meter, and height 2.2 meters, while the conventional dimensions are approximately length 1.5 meters, width 1.2 meters, and height 2.3 meters. These toilets are suitable for scenarios with limited space or low foot traffic, such as temporary construction sites and small event venues.
2. Double-person standard type: Length 1.8-2.2 meters, width 1.0-1.2 meters, height 2.2-2.4 meters. The conventional dimensions of the basic double-person model are approximately length 2.5 meters, width 1.5 meters, and height 2.3 meters. These are suitable for scenarios with moderate foot traffic, such as community parks and commercial districts.
3. Barrier-free type: Length 2.0-2.4 meters, width 1.2-1.5 meters, height 2.2-2.4 meters. The size requirements for functional barrier-free public toilets are a minimum length of 2 meters, width of 1.5 meters, and height of 2.4 meters. These toilets need to meet requirements such as wheelchair turning space and handrail installation, and are suitable for public places and transportation hubs.
4. Luxury type: Length 2.5-3.0 meters, width 1.5-2.0 meters, height 2.4-2.6 meters. These toilets are usually equipped with independent sinks, air conditioners, smart devices, etc., and are suitable for high-end scenic spots and large-scale exhibitions.

Dimensions suitable for special scenarios:
Temporary public toilets in scenic spots or large-scale events often adopt multi-unit designs (4-6 toilet positions), with dimensions approximately length 5-8 meters, width 2 meters, and height 2.4 meters. Some products support customization, such as single-squatting-position dimensions of 1.6 meters×1.6 meters or double-squatting-position dimensions of 3.2 meters×1.6 meters, which can be flexibly adjusted according to site conditions.

The selection of mobile toilet dimensions should comprehensively consider usage scenarios, foot traffic, functional requirements, and transportation and installation conditions. It is recommended to communicate with suppliers to customize a plan according to actual needs.