Jinchang Prefabricated Mobile Toilet

The Jinchang prefabricated mobile toilet is a modern public sanitation facility that is integrated, modular, and highly adaptable to various environments. Its core features are as follows:

1. Rapid Deployment and Overall Prefabrication
The main structure, internal piping, and equipment are manufactured in an integrated manner at the factory. After being transported to the site, they can be used directly without foundation work, ensuring consistency of functional modules before and after movement. This design significantly shortens the construction cycle and is particularly suitable for scenarios such as temporary events, post-disaster reconstruction, or remote areas.

2. Modular Connection System

• Water Supply Module: It uses collapsible hoses and quick connectors, allowing connection to municipal water networks or independent water storage devices within 10 minutes, adapting to different water source conditions.
• Sewage Disposal Module: Equipped with sealed storage containers and vacuum suction interfaces, some models pre-treat waste using biodegradation technology to reduce odors and pollution risks.
• Power Module: Integrates solar panels and battery packs, enabling 72 hours of basic lighting and ventilation in environments without external power grids, reducing energy consumption dependence.

3. Structural Stability and Material Innovation

• Multi-point Balancing System: Hydraulic leveling legs are installed at the bottom of the box, automatically adjusting to a horizontal state on ground inclined up to 10 degrees, ensuring safety during transportation and use.
• Wall Design: Uses sandwich composite materials (outer layer of galvanized steel plate, middle layer of polyurethane foam, inner layer of fiberglass-reinforced plastic panel), reducing weight by 40% while maintaining wind pressure resistance comparable to traditional brick-and-mortar walls. The joints feature a labyrinth seal design to prevent odor leakage caused by transportation vibrations.

4. Internal Space Optimization

• Essential Equipment: Each standard unit is equipped with an air negative pressure exhaust system, water-saving flush valves, and ultraviolet disinfection lamps to ensure sanitary conditions.
• Humanized Design: The sink area features sensor-activated faucets with an 8-second water flow duration; the floor is laid with non-slip fiberglass grating with 8mm diameter drainage holes, balancing drainage and fall prevention needs.

5. Environmental Adaptation and Resource Recycling

• Temperature Control: Phase change materials in the wall sandwich can maintain internal temperature fluctuations within 3℃ over a 15℃ day-night temperature range.
• Rainwater Utilization: Some models collect rainwater from the top, which after three-stage filtration, can be used for plant irrigation or external cleaning.
• Energy-saving Lighting: Uses light pipe technology to导入 (import/introduce) natural light, reducing electricity consumption by 70% during the day.

6. Waste Disposal Technology

• Solid Waste: Decomposed in stages, with biological enzyme pre-treatment reducing volume by 60%, then converted into stable organic matter through aerobic fermentation.
• Liquid Waste: Separated by membrane technology into reusable gray water and concentrated wastewater, the latter requiring professional vehicle transportation for treatment, with no methane or other greenhouse gas emissions throughout the process.

7. Long-term Maintenance and Intelligent Management

• Intelligent Monitoring System: Built-in sensors continuously monitor ammonia concentration, humidity, and equipment status, automatically sending maintenance alerts when abnormalities occur.
• Durability Design: Main structural components use weather-resistant steel and cathodic electrophoresis treatment, maintaining corrosion resistance for 15 years in saline-alkali environments; vulnerable parts are designed for front-end removable access, allowing repairs without entering the equipment interior.

Service Providers: Jiamu Youshu Prefabricated Construction (Jiangsu) Co., Ltd. (products include models C1006, C1005, etc.) and Dalian Maipu Technology Co., Ltd. both provide related design and installation services.